BoltCOR 30-17
EN50155, Intel Core and Xeon Fanless Server
The BoltCOR 30-17 is a fanless EN50155 certified server that is designed to exceed the requirements of rolling stock applications in the Tx temperature class; it is extremely rugged and suitable for any project where consistent performance and reliability are a must.
With up to 32GB of ECC DDR4, soldered down CPUs, mSATA storage and an S2 class power supply, the BoltCOR 30-17 is extremely reliable; conformal coating, a vent-free design and a sturdy build add extra protection to a compact, 295mm deep, 1U rack-mount chassis.
Based on standard COM Express, it is available in a range of high performance configurations, including Intel 6th Gen Core i7, i5, Celeron and Xeon D 15xx CPUs, with a selection of cores (2 to 8) and frequencies (up to 2.8Ghz).
Expandability options include two HDD/SSD drives, key-locked swappable storage bays, internal mSATA, a user-accessible SD slot and RAID levels 0, 1, 10 and 5; additional peripherals can be added via 3 miniPCIe and one x16PCIe slot.
The BoltCOR 30-17 features a wide range of radio and wireless capabilities, including cellular carrier pre-certified system configurations. Customization options include internal and external global cellular modems, dual modem/dual SIM configurations, MIMO Wi-Fi, Bluetooth Low Energy, and a GPS with Dead Reckoning.
The BoltCOR 30-17 affords unprecedented system configurability: off-the-shelf configurations and build-to-order variants out of a palette of CPU, power supply, memory, storage and I/O subsystems options.
Designed for rolling stock applications, the BoltCOR 30-17 offers long term availability and support programs that ensure continuity of supply and customer service.
BoltGATE 20-25
EN50155 Multi-Service Gateway & Edge Controller
The BoltGATE 20-25 is EN50155 certified and is designed to exceed the requirements of rolling stock in the Tx temperature class. With IP65 rating, it is extremely rugged and suitable for any application where consistent performance and reliability are a must.
Based on the Intel Atom E38xx processor family, with up to 4GB of RAM and 8GB of eMMC, the BoltGATE 20-25 offers extra storage expansions through optional internal or removable 2.5″ SATA SSD/HDD, mSATA, and a user- accessible microSD slot.
At 30W max, the BoltGATE 20-25 is a fanless, compact unit that provides a large number of communication and I/O interfaces: two Gbit Ethernet, protected USB (one USB 2.0 for general purpose and one USB 2.0 for maintenance), four opto-isolated serial (RS-232/RS485/RS-422) interfaces, eight opto-isolated DIO plus odometer and key signals, audio line in/ out and video. It also features a wide range of connectivity capabilities including a global cellular modem, Wi-Fi, Bluetooth Low Energy, and a dedicated internal GPS with Dead Reckoning.
As a result of its modular design, the BoltGATE 20-25 can easily be customized for the requirements of the target application. With three full miniPCIe slots, it can accommodate additional connectivity or communication options and, through Eurotech Professional Services, it can offer custom front panel configuration and connectors or customized software images.
The BoltGATE 20-25 comes with Linux and Windows operating systems. It also includes a genuine Oracle Java SE Embedded 8 Virtual Machine and Everyware Software Framework (ESF), a commercial, enterprise-ready edition of Eclipse Kura, the open source Java/OSGi middleware for IoT gateways. Distributed and supported by Eurotech, ESF adds advanced security, diagnostics, provisioning, remote access and full integration with Everyware Cloud (EC), Eurotech’s IoT integration platform (separately available).
COM-1267
PC/104 Switch with five 10/100MB Ethernet ports
The COM-1267 is a versatile five-port Ethernet switch. A cross-over connection can be realized between ports 2 and 3. The board features QoS for DiffServ priority.
The COM-1267 is a versatile 10/100Mbps five-port Ethernet switch that can function in 10BaseT or 100BaseTX modes and allow connections made through onboard RJ-45 connectors. The COM-1267 can be used as a standalone module or integrated within a PC/104 or PC/104-Plus system together with a Eurotech CPU module.
Cross-over connection
The COM-1267 can optionally feature a cross-over connection between Ethernet ports 2 and 3 that can be activated via software, automatically activated when the board is powered off, or activated when a Watchdog signal is received from the host Eurotech CPU module.
COM-1289
Low power 12-channel GPS receiver and Tri-band GSM/GPRS modem PC104 board
The Eurotech COM-1289 is a PC/104 module with GSM/GPRS (optionally GSM-R) wireless cellular connectivity and a low power GPS receiver. A SIM-card can be installed on-board or in an external card carrier. Board configuration is performed in software eliminating banks of configuration, interrupt and base address jumpers. The setup information is stored in an EEPROM.
AIM104-IO32
PC/104 32 Digital TTL I/Os
The AIM-IO32 is an 8-bit PC/104 module providing 32x channels of digital TTL I/O. Each channel can be configured as an input or an output. Outputs are configurable on power-up or reset.
ALUDRA
Single board computer with Atom processor EBX form factor
ALUDRA fan-less processor board provides all the benefits of Intel's new Atom LPIA architecture in an EBX form factor. ALUDRA has on board an Intel 945GSE graphics and memory controller and Intel ICH7-M IO controller hub.
ALUDRA is compatible with all major desktop operating systems and is also available with pre-installed ready to run embedded operating systems including Windows XP Embedded and Fedora Linux.
CPU-1482
PC/104-Plus Rugged Intel Pentium M with 8 USB 2.0 ports
The CPU-1482 is a rugged, efficient embedded board consisting of two modules: a mezzanine CPU module and a PC/104-Plus form factor carrier. It includes a an Intel Pentium M processor running at 1.4GHz with the Intel® i855GME chipset.
The board is available in standard and extended temperature range versions and provides advanced features such as Power Management.
CPU-1484
PC/104-Plus Rugged Intel Pentium M with Gigabit Ethernet
The CPU-1484 is an embedded board consisting of two modules: a mezzanine CPU module combined with a PC/104-Plus form factor carrier.
The mezzanine CPU module features the Intel® Pentium® M 1.4GHz processor and the Intel® i855GME chipset. The system comes with 512MB DDR, 266MHz (PC2100), soldered onboard RAM. No active cooling is required to operate it within the standard and extended temperature ranges.
ISIS XL
PC/104-Plus CPU Module with extended Temperature Intel Atom Low Power
The ISIS XL is a PC/104-Plus CPU board with an Intel Atom Z5xx processor up to 1.3GHz.
The ISIS XL module consists of a PC/104-Plus carrier board coupled with the Catalyst XL module and delivers the same rich feature set of the ISIS board in an extended temperature range. Requiring only 7-8W (typical), the ISIS XL delivers an unprecedented combination of features, performance, low power consumption, ruggedness and compatibility.
Remakable built-in features include an iTrax300 20-channel GPS receiver which provides full position/velocity/time functionality and an integrated security module system from Atmel that is TCG v1.2 compatible.
ISIS
Intel Atom Low Power PC/104 Plus CPU Module
The ISIS processor board provides the low power and rich feature set of Intel's Atom LPIA architecture in PC/104‑Plus form factor.
The ISIS module consists of a PC/104‑Plus carrier board coupled with the Catalyst module and requires under than 8W at up to 1.6GHz
The ISIS is ideal in any design where X86 compatibility, low power, high performance and a wide range of peripherals must be combined; it is also perfect to bring new life to existing projects by providing a simple and effective upgrade path for legacy PC104 CPU modules.
Loading data...