MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
M-Max V75 Short chassis
Rugged VITA 75-compliant Conduction-cooled Enclosure
The M-Max® V75 Short chassis is a fully sealed rugged enclosure with passive cooling designed according to the VITA 75 footprint, providing reliable operation in tough environments. Typical systems housed in this VITA 75-compliant enclosure deliver IP66 dust and moisture protection, withstand shocks up to 40g and vibration up to 2.5g. The fully sealed enclosure houses one PC/104 or similarsized board. The configurable front panel can be outfitted with variety of customer-defined connectors. The M-Max® V75 Short chassis is tested and guaranteed over temperature range of −40 to +70 °C @ 11W.
M-Max ATR-chassis
Rugged ATR conduction-cooled enclosures family for computer systems
The M-Max® ATR-compliant chassis is a family of fully sealed rugged enclosures with passive cooling, providing extreme physical protection for high performance systems.
The machine-worked aluminum chassis is especially designed for the most challenging environments. Providing excellent shock and vibration protection, the completely fanless chassis uses natural convection and conduction cooling.
The fully sealed 1/2 ATR Short version enclosure houses up to 8 PC/104 or similar-sized boards. The configurable front panel can be outfitted with variety of customer-defined connectors.
M-Max SW208
Rugged Gigabit Ethernet Switch
M-Max® SW208 is a ruggedized 8-Port Gigabit Ethernet Layer 2+ Managed Switch providing reliable operation in tough environments including transportation (ground, rail, air and marine), agriculture, and mining and processing.
It accepts a wide power supply voltage input, and is tested and guaranteed over temperature range of −40 to +75°C. Its rugged enclosure is designed according to VITA75 footprint.
The SW208 has eight 10/100/1000 Mbps copper twisted pair ports. Support for control and management is through web interface, and host processor access through a Command Line Interface (CLI).
MicroMax, as a manufacturer of ruggedized industrial computers, takes a customized approach to each client. Our engineering group can design M-Max® systems to fit customer-specific technical requirements.
MM-SSD-1TB
Solid state drive
MM-SSD-1TB SSD is over 20 times faster than a typical hard drive and consumes significantly less power. It enables your computer to boot up almost immediately, load files and programs almost instantly, accelerate demanding applications, and manage power so that your battery lasts up to 50 minutes longer. Backed by the most advanced feature set available — Native Write Acceleration, RAIN technology, Adaptive Thermal Protection, and our exclusive data integrity algorithm — the MM-SSD-1TB delivers a complete performance gain.
M-Max VT AR TRN-02
Rugged Industrial Computer
The M-Max® VT AR TRN-02 is a high-performance rugged industrial computer for demanding and critical applications requiring performance comparable to desktop systems. The system is IP66 rated and can withstand shocks of up to 40g and vibration of up to 6g.
The M-Max® VT AR TRN-02 is configured with Intel Core i3 1.9 GHz CPU and Intel HD 530 video, with hardware video decoding. The M-Max® 800 AR TRN-02 has 5x LAN Gigabit Ethernet, 1x RS-232 and 3x USB 2.0 ports. Data storage options include vibration proof industrial SSDs with RAID functionality (software or hardware option).
The system has replaced our M-Max® 800 EP2/TRN-02 which was based on EP2 platform.
M-Max 820 EP4/USO
Rugged Industrial Error-free Rackmount System
The M-Max® 820 EP4/USO consists of two high performance rugged industrial computers with passive cooling. It is designed to provide reliable operation using ‘2 out of 2’ or redundant architectures in harsh environments for critical applications.
Providing shock and vibration protection, the M-Max® 820 EP4/USO can operate under extreme temperatures from −40 to +60 °C, dust and humidity.
Data storage options include vibration proof industrial SSDs with RAID functionality (sofware or hardware option).
The computer is used as a part of a safety system at railroad and operate as an optical time-domain reflectometer.
M-Max 700 PR/TTI
Rugged Industrial Computer with UPS Subsystem
M-Max® 700 PR/TTI is a high performance rugged computer for vehicle data acquisition. The system is designed to operate in extremely harsh environments and is suitable for most applications that support real-time video encoding. The Max® 700 PR/TTI is equipped with video capture CVBS, CAN interfaces, and has an expanded set of RS-232/422/485 ports, plus digital I/O. The embedded video encoder with JPEG2000 compression/decompression supports three video input channels and video decoders for simultaneous sampling.
The unit’s internal super-capacitor based UPS provides 2 minutes of backup power.
MicroMax, as a manufacturer of industrial computers, takes a customized approach to each client. Our engineering group can design M-Max® systems to fit customer-specific technical requirements.
M-Max 400 ST/USO
Rugged Industrial Error-free Computer with UPS Subsystem
The M-Max® 400 ST/USO is an error‑free rugged computer for on‑board and off-the-shelf applications. It provides error-free signaling information processing, based on 2-out-of-2 architecture.
The M-Max® 400 ST/USO contains two identical subsystems connected to each other via internal interface. Each subsystem has its own processing core and a UPS employing an intelligent ultracapacitor-based charging device.
The M-Max® 400 ST/USO’s two independent CPUs form a vital processing core and perform calculations (such as interlocking logic) in different ways. Once per cycle they are synchronised with each other to exchange data and perform consistency cross-checks.
The UPS ultracapacitors provide the system with 70 seconds of backup power. The system is designed for use on stationary objects within the railway infrastructure.
MicroMax, as a manufacturer of industrial computers, takes a customized approach to each client. Our engineering group can design M-Max® systems to fit customer-specific technical requirements.
Gateway-CAN-MVB2
Rugged Intelligent Locomotive Gateway
The Gateway-CAN-MVB2 rugged computer is used to decode signals between railroad continuous Automatic Train Control (ATC) systems with CAN interfaces or similar devices and onboard systems utilizing Multifunction Vehicle Bus (MVB).
This fanless intelligent Gateway is designed to be used in onboard safety systems installed in locomotives, high speed trains such as Velaro, Desiro and others. The system can be easily adapted to the technical requirements of different railroad vehicles.
This IP65 rated system is housed in a rugged aluminum enclosure with dual shock and vibration protection. It is based on proven PC/104 technology, and its compact design and low power makes it the ideal solution for on-board smart interface conversion.
EPS-12002L
Compact 12+2 Port Managed Ethernet Switch
Main features:
Rugged Ethernet switch for vehicle and other harsh environment applications
12 gigabit Ethernet ports for twisted pair connections
2 1/2.5/5/10G SFP+ sockets for fiber or copper transceivers
All ports feature non-blocking wire-speed performance
Layer 2+ switching and Layer 3 routing software available
IEEE 1588 PTP support available
Software customization and branding available
Rugged design with latching connectors
-40 to +85°C operating temperature
5.3×2.2″ / 136×55mm
Heat sink and heat spreader thermal options
The EPS-12002L is a compact managed rugged Ethernet switch based on Diamond’s EPSM-10GX Ethernet switch module. The switch consists of the EPSM-10GX module mounted on a carrier board that provides power, magnetics, and connectors, along with a heat sink or heat spreader.
EPS-12002L provides 12x 10/100/1000Mbps copper ports and 2x 1/2.5/5/10Gbps SFP+ sockets for fiber or copper transceivers. EPS-12002L is ideal for vehicle and industrial applications requiring a small form factor with gigabit Ethernet switching and fiber connectivity support.
Two software packages are available, Layer 2+ switching and Layer 3 routing/switching. All software features are manageable via a GUI web interface accessible over any port, as well as with a command language accessed via a built-in RS-232 port.
EPS-12002L is designed specifically to meet the challenges of vehicle and other rugged environments, with its −40/+85°C operating temperature range, latching I/O connectors, and MIL-STD-202G shock/vibration resistance. A 5-36V input power supply provides compatibility with a range of industrial and vehicle power supplies.
Embedded Software
Two software packages are available: Layer 2+ switching and Layer 3 routing/switching. In addition, IEEE-1588 precision time protocol support is available with a minor modification to install a precision clock circuit on the board. All software features are manageable via a GUI web interface accessible over any port, as well as with a command language accessed via a built-in RS-232 port. Customer branding is available to put your logo / color scheme / part numbers on the GUI and serial interface.
The table below shows some of the more popular features available.
Layer 2+ software highlights include the following:
8K MAC addresses and 4K VLANs (IEEE 802.1Q)
8K IPv4 and IPv6 multicast group support
Jumbo frame support at all speeds
Flexible link aggregation support based on Layer-2 through Layer-4 information (IEEE 802.3ad)
Multicast and broadcast storm control, as well as flooding control
Rapid Spanning Tree protocol (RSTP) and MSTP
Multiple protocol support: IEEE 802.1d, IEEE 802.1w, IEEE 802.1s, and IEEE 802.1X
8 priorities and 8 QoS queues per port with scheduling
Layer3 software additional highlights:
Hardware- and software-based IPv6 L3 static routing
RFC 2328 OSPFv2 dynamic routing
IEEE 1588 precision time protocol (PTP)
RADIUS accounting
Port and Queue policers
Cable Kit
Cable Kit for EPS-12000-CM: 3x Quad Gigabit Ethernet cables, Power cable, Serial cable.
