MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
CU Platform
The highest performance and upgrade opportunities
The CU platform offers the highest performance available and great expandability.
The CU platform can be equipped with a variety of Intel Xeon and Intel Core i7 CPU options and up to 64 GB of RAM. Storage options include SSDs from 8 GB. The platform uses NVIDIA Quadro P1000 or NVIDIA GeForce GTX 1050Ti for video processing and DisplayPort/HDMI/DVI, VGA, LVDS interfaces for video output.
Other interfaces include 2x Gigabit Ethernet, 4x USB 3.0, 2x RS-232/RS-485 and HD Audio. Power consumption is 100 W. Operating temperature range is −40°C to +50°C (-40°F to +122°F).
The M-Max CU platform is compatible with M-Max® ATR System, HR 3U.
GX Platform
Optimal performance and good expandability
The GX platform will fit applications which require both optimal performance and low power consumption.
The GX platform is equipped with 4-core Celeron N3160 1.6–2.24 GHz CPU and can carry 2 to 8 GB of RAM. Storage options include SSDs from 64 GB via mSATA.
The GX platform uses HD Graphics 320–640 MHz for video processing and VGA interface for video output. Audio interfaces include 1 output and 1 mic input. Other interfaces include 2x Gigabit Ethernet, 4x USB 2.0, 4x RS-232, 2x RS-232/485 and 16x DIO lines.
Power consumption of the platform is 36 W. Operating temperature for GX platform-based system is -20°C to +50°C (-4°F to +122°F).
The GX platform is compatible with the following M-Max® Systems: HR 1U, HR 3U.
PR7 Platform
Optimal performance and good expandability
The PR7 Platform will fit applications which require both optimal performance and low power consumption while offering better expandability in comparison with the LP Platform.
The choice of CPUs for the PR7 Platform includes 2-core Atom E3826 1.46 GHz and Atom E3845 1.91 GHz. The PR7 Platform can be equipped with either 2 or 4 GB of RAM (soldered on board). Storage options include SSDs from 8 GB via mSATA2 and SATA2 interfaces.
The PR7 Platform uses HD 7th Generation 533-667 MHz or 542-792 MHz for video processing and either VGA or HDMI + DP interfaces for video output. Audio interfaces include 2x inputs, 2x outputs, and 1x mic input. Other interfaces include 2x Gigabit Ethernet, 2x USB 2.0, 1x USB 3.0, 4x(lim.) RS-232/485 and 16x DIO lines.
Power consumption of the PR7 Platform is 11 W or 14 W depending on the chosen configuration. Operating temperature for a PR7 Platform-based system is −40°C to +70°C (-40°F to +158°F). The standard enclosure for the PR7 Platform is Versatainer.
The PR7 Platform is compatible with the following M-Max® Systems: PD 7, VT, ATR, HR 1U, HR 3U, VI.
COM335
COM Express Carrier Board
DFI’s carrier board (also known as base board or evaluation board) offers a flexible engineering development environment for COM Express Type 10, Type 7, Type 6, Type 2, and Qseven. Which helps our customers minimize integration requirements while reducing development time and cost.
EHL9A2
COM Express Mini module
COM Express Mini module delivers high performance on a small footprint, which features a 55×84 mm size. It is ideal for space-limited, power-saving, and mobile applications. DFI’s ultra-small modules are available with COM Express pin-out Type 10.
PCAN-USB FD
CAN and CAN FD Interface for High-Speed USB 2.0
The CAN FD adapter PCAN-USB FD allows the connection of CAN FD and CAN networks to a computer via USB. A galvanic isolation of up to 500 Volts decouples the PC from the CAN bus. The simple handling and its compact plastic casing make the adapter suitable for mobile applications.
The new CAN FD standard (CAN with Flexible Data rate) is primarily characterized by higher bandwidth for data transfer. The maximum of 64 data bytes per CAN FD frame (instead of 8 so far) can be transmitted with bit rates up to 12 Mbit/s. CAN FD is downward-compatible to the CAN 2.0 A/B standard, thus CAN FD nodes can be used in existing CAN networks. However, in this case the CAN FD extensions are not applicable.
The monitor software PCAN-View and the programming interface PCAN-Basic for the development of applications with CAN connection are included in the scope of supply and support the new standard CAN FD.
ISO / Non-ISO CAN FD:
Since the first implementations of CAN FD, the protocol has been improved and is now included in the standard ISO 11898-1. The revised CAN FD standard is not compatible with the original protocol.
PEAK-System takes this into account by supporting both protocol versions with their CAN FD interfaces. If required, the user can switch to the CAN FD protocol used in the environment by software (Non-ISO and ISO).
PCAN-PCI/104-Express
CAN Interface for PCI/104-Express
The PCAN-PCI/104-Express card enables the connection of one, two, or four CAN busses to a PCI/104-Express system. Up to four cards can be stacked together. The CAN bus is connected using a 9-pin D-Sub plug on the slot brackets supplied.
There is galvanic isolation of up to 500 Volts between the computer and CAN sides. The card is available as a single, dual, or four-channel version.
The package is also supplied with the CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.
Siemens MVB PC/104
MVB Interface Module
The MVB PC/104 is an interface module with which it is possible to connect electronic controllers to the MVB.
The user of the MVB PC/104 module is provided with API software for their development.
The MVB PC/104 connects the parallel PC/104 bus with the serial MVB. Data exchange from the MVB to the PC/104 bus and vice versa is performed via the traffic memory. Arbitration of the traffic memory is performed by the MVBCS1 ASIC.
The module is designed for use with a 16-bit CPU with ready acknowledgment. Bytewise accesses to the traffic memory are not possible because of its wordwise organization. Accesses must always be wordwise (only to even addresses).
PCE-7129
6th Generation Intel Core processor-based platform
PCE-7129/5129/5029 is a PICMG 1.3 form-factor single host board, which is designed with Intel C236 (PCE-7129), Q170 (PCE-5129), and H110 (PCE-5029) PCH for industrial applications that need high computing power and strong I/O capability.
PCE-7129/5129/5029 supports 14nm manufacturing technology, LGA1151 socket Intel Core i7/i5/i3, Pentium and Xeon processors that integrate memory and graphic controllers, and support for DDR4 2133 SDRAM up to 32 GB. Within advanced computing technology, PCE-7129/5129/5029 is suitable for processor hungry industrial applications.
PCE-7129/5129/5029 offers excellent graphics capability with its integrated Intel HD graphics core with a minimum 1 GB shared memory (requires a minimum 2GB system memory). With this, PCE-7129/5129/5029 provides strong 2D/3D graphics processing power without an additional graphic card to save extra cost, power consumption and thermal integration effort.
PCE-7129/5129/5029 features rich I/O interface: M.2 which can support M.2 (2280) type-M for both SATA3.0 (6 Gb/s) and PCIex4 (Gen3.0; 32 Gb/s) devices, SATA 3.0 ports with SW raid 0, 1, 5, 10 (PCE-5029 do not support RAID), integrated USB 3.0 controllers @ 5Gbps, 2 x RS-232 serial COM ports. Moreover, PCE-7129/5129/5029 can support Advantech PCE-5BXX and PCE-7BXX (PCE-7129 only) series backplanes offering various combinations of expansion such as PCI, PCI-X and PCIe slots.
With flexible I/O and graphic expansibility, PCE-7129/5129/5029 is an excellent, cost effective graphic or I/O oriented workstation class hardware platform. With outstanding performance and exceptional features, PCE-7129/5129/5029 is the ideal computing platform for advanced industrial applications.
CH960-CM246/QM370
COM Express Basic module
COM Express Basic module provides high-level processing performance and high-speed interfaces for a wide range of computing-demand applications such as medical and industrial automation. DFI’s Basic modules are compatible with COM Express pin-out Type 2, Type 6, and Type 7.
