MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
Xtreme/GbE 8/12-port
PC/104 Compliant Managed Carrier Ethernet Switch
Connect Tech’s Xtreme/GbE Managed Carrier Ethernet Switch provides Carrier Grade Ethernet switching capabilities in an extremely small embedded form factor.
Excellent for high-end applications such as Mobile and Microwave backhaul, the Xtreme/GbE Managed Carrier Ethernet Switch is also a highly reliable way to communicate with 10/100/1000 devices in an embedded system. Powered by the latest generation Carrier Ethernet Switch engine the Microchip VSC7428/VSC7429. Its embedded 416 MHz MIPS 32-bit CPU, 1Gb DDR2 external memory and DMA-based frame extraction and insertion support timing over packet, Ethernet OAM, and performance monitoring.
Available in models with RJ-45 or Rugged Positive Locking Headers, making this embedded Ethernet switch ideal for any type of environment.
Xtreme/PSU Isolated
PC/104 Compliant Isolated Power Supply
Connect Tech’s Xtreme/PSU Isolated power supply is a high efficiency, high powered Isolated PC/104 form factor power supply with extended temperature capabilities. Xtreme/PSU Isolated provides isolated power to on-board terminal block connectors and also directly powers all of the PC/104 family expansion buses such as PC/104, PC/104-Plus, PCI-104, PCI/104-Express and PCIe/104.
Xtreme/PSU Isolated is a highly reliable power supply which provides up to 195W of total output power with +3.3V, +5V, and +12V output voltages. It can be used as a stand-alone power supply to power any other embedded system, or used directly to power any PC/104 stack or single board computer (SBC).
Xtreme/PSU Isolated power supply has a wide input voltage range that accepts +9V to +36V DC and is specifically designed for use in a broad range of rugged applications including military, industrial, and air and ground vehicles. Xtreme/PSU Isolated power supply can be used in combination with Connect Tech’s stackable CPU and expansion boards for a total design solution.
SMARC 2.0 Carrier
Extremely small SMARC carrier board
Connect Tech’s SMARC 2.0 carrier is an extremely small SMARC carrier board ideal for low power IoT applications as users can take advantage of the integrated on-board wireless capabilities found on the SMARC 2.0 modules. The carrier has USB 3.0, USB 2.0, 2x MIPI CSI-2 camera interfaces, HDMI outputs, and expansion via 2x miniPCIe Full Sized slot.
Connect Tech’s SMARC 2.0 carrier board supports the latest generation Apollo Lake x86 low-powered processors and exposes next-generation interconnect (USB 3.0, DDI, MIPI-CSI-2).
SMARC 2.0 supports an extended temperature range of -40°C to +85°C and offers a very small footprint; ideal for mobile or stationary applications.
COM Express Type 6 Ultra Lite Carrier Board
Carrier Board
Connect Tech’s COM Express Type 6 Ultra Lite Carrier Board is a compact carrier board which matches the dimensions of a COM Express Basic module. COM Express Type 6 Ultra Lite Carrier Board is ideal for space constrained applications, and supports extended temperature ranges of −40°C to +85°C. Supports the latest Intel processor sets.
Quark
Carrier for NVIDIA Jetson Xavier NX & Nano
Connect Tech’s Quark Carrier for NVIDIA® Jetson Xavier™ NX & Nano is an affordable, ultra small, and feature rich carrier for AI Computing at the Edge. Just slightly larger than the Jetson SODIMM module, it’s ideal for vision applications, inference, and unmanned payloads.
Quark’s design includes a rich I/O set including 1x USB 3.1, 2x GbE, 2×2-lane MIPI CSI-2, 1x USB OTG, 1x SD card slot, 3×3.3V UART, 2 x I2C, 1x CAN 2.0b, and 1x SPI as well as positive locking IO connectors optimized for rugged environments.
NOTE: Do not use the 19V power supply from the Jetson Xavier™ NX Dev Kit with the Quark Carrier.
Xtreme-10G
Managed Ethernet Switch/Router
Connect Tech’s Xtreme/10G Managed Ethernet Switch/Router provides high density, high port count Layer 2 switching and Layer 3 routing with 10G uplinks. A total of 36 switchable ports, with 4×10G, 8×1GbE (SGMII), and 24×1GbE (Copper 10/100/1000Mbps) ports in an extremely small form factor 85mm x 85mm.
The device targets managed Layer 2 and Layer 3 equipment in SMB, SME, and industrial applications where high port count 1GbE switching with 10G aggregation/uplinks are required.
Mini PCIe GbE
Gigabit Ethernet Mini PCIe module
Connect Tech’s Mini PCIe GbE boards are rugged, low cost Gigabit Ethernet Mini PCIe modules that are ideal for adding extra Ethernet capabilities to any system with minimal increase in overall system size and power consumption.
The modules utilize PCIe signaling which allows it to be used in any Mini PCIe socket that supports PCIe. The wide operating temperature, latching Ethernet connector and cabling solution allows these modules to be used in harsh environments.
Compatibility with a large variety of popular operating systems allows these boards to be easily integrated into a wide array of new and existing systems.
Rogue
Carrier for NVIDIA Jetson AGX Xavier
Connect Tech’s Rogue is a full featured Carrier Board for the NVIDIA Jetson AGX Xavier module. This carrier board for Jetson AGX Xavier is specifically designed for commercially deployable platforms, and has an extremely small footprint of 92×105mm.
The Rogue provides access to an impressive list of latest generation interfaces on the Jetson AGX Xavier while adding additional interfaces of 3x USB 3.1, 2x GbE, 2x HDMI and a locking Mini-Fit Jr. power input connector.
Rugged camera add-on expansion boards will also be available for use with the Rogue to interface directly with the Jetson AGX Xavier high density MIPI CSI interfaces.
COM Express + GPU Embedded System
A ruggedized small form factor embedded system with GPU
The COM Express + GPU Embedded System from Connect Tech combines Intel Skylake and Kaby Lake x86 processors with high-end NVIDIA Quadro, Tesla, and GeForce Graphics Processing Units (GPU) all into a ruggedized small form factor embedded system. Choose from highest-end, highest-performance models or from low-powered extended temperature models all ideal for high-end encode/decode video applications or GPGPU CUDA processing applications.
This embedded system exposes all of the latest generation interconnect including: Gigabit Ethernet, USB 3.0 and 2.0, DisplayPort++, VGA, LVDS, SATA III, GPIO, I2C, mSATA, miniPCIe, PCIe/104 and SD Card Expansion. This embedded system uses all locking ruggedized positive latching connectors.
VXG part numbers have Passive Heat Spreaders that are to be installed into a Customer Designed End Thermal Solution. DXG part numbers have an Active Cooling Solution with Integrated Support Frame.
BlueStorm/SP Opto
Serial Communications
The BlueStorm/SP Opto offers the added protection of optical isolatation for your critical applications. The BlueStorm/SP Opto is an extension of the BlueStorm product family and available as a standard profile card only.
Dependability, high speed data transfer rates and 3kV of optical isolation protection makes these cards ideal in environments where harsh conditions may disrupt communications.
Available with 4 ports of RS-232/422/485 connectivity, these BlueStorm/SP Opto cards are compatible with 3.3V and 5V PCI slots.
Bi-directional data speeds up to 1.8432 Mbps (RS-422/485) ensure fast data aquisition and communications.
All BlueStorm/SP Opto products are FCC certified and CE marked.
