MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
PE1000
PCIe/104 & PCI/104-Express Avionics Interface Cards
Multi-Protocol Interfaces
The PE1000 family of PCIe/104™ and PCI/104-Express™ cards enable embedded computers to interface with a variety of avionics databuses.
Key Features:
Multiple protocol support
Rugged Extended Temperature Design
Single- or Multi-function 1553 models
Powerful protocol engine
Easy-to-use software interface
Applications:
Mission computers
Embedded monitor/recorder systems
LRU and system interfacing
System analysis and integration testing
Performance monitoring and analysis
OEM equipment
Reliable Operation
These rugged cards provide the capability to reliably communicate with and monitor avionics equipment and systems. The family includes models with single and multiple protocols in an assortment of channel counts and functionality. A single card can provide all the avionics functionality needed for most applications.
Easy to Use
PE1000 interface cards are easy to install, integrate, and operate. High performance assures maximum data throughput on all channels. With all its capability and versatility, the PE1000 is ideal for a wide range of avionics embedded and test applications.
High Performance
PE1000 interface cards use Ballard’s time-tested 5th generation avionics protocol engines with bus mastering and a large 32-MB built-in memory to yield high performance. All models include sixteen avionics level input/output discretes and IRIG time synchronization/generation.
Cost-Effective Solution
There is a wide choice of models — ranging from simple, single-protocol, low channel-count cards to complex, multi-protocol, high channel-count cards. Equivalent models are available in both PCIe/104 and PCI/104-Express. Extended temperature range is standard, and conformal coating is an option. This wide selection allows the most cost effective solution to be used on each application.
DL 615
Data Loaders for ARINC 615 & 603
The DL 615 is the modern replacement for outmoded 3½‑inch floppy disk only ARINC 615 portable data loaders (PDL). Any PC running Microsoft Windows can perform data loads using the USB to ARINC 429 interface, cables, and software included with the DL 615. While being as simple to use as older floppy disk PDLs, the DL 615 provides record keeping, flexibility in data management, and powerful features for troubleshooting and enabling data loads into difficult LRUs. As an added benefit, the interface can be used as a general purpose ARINC 429 (and optionally ARINC 717) maintenance tool.
The DL 615 provides flexibility in how data to be loaded is stored and managed. Data can be loaded from floppy disks, hard disk, USB device, CD, DVD, and even from wired or wireless network locations. The transfer status display shows exactly how the load is progressing. Some LRUs have non-standard timing and can be difficult to load. The DL 615 provides compliant, tolerant, and custom timing options which, along with the included 615 protocol recording and debugging/diagnostic tools, enable the DL 615 to load LRUs that are impossible to load with other loaders.
The DL 615 can be easily configured to log data load sessions for record keeping and debugging purposes. Logs can include basic load details only or detailed records with all bus activity. The entry screen can optionally prompt the user for additional details at the start of a transfer session.
Benefits:
Intuitive operation
Lightweight, portable and durable
Modern solution
Obsolescence proof
Powered by PC over USB
Use with any available PC
Integrates with other applications
Multipurpose loader/maintenance tool
All DL 615 models include the following items:
Data loading software (MS Windows)
ARINC 429 databus to USB interface (also available with ARINC 717)
53-pin data loader cable
53-pin to 31-pin adapter cable (ARINC 603)
Locking USB cable
Rugged carrying case
OmniBus
PCI & cPCI Avionics Interface Cards for Multiple Protocols
OmniBus PCI and cPCI cards provide interfaces for avionics databuses, as well as general purpose digital I/O and IRIG sourcing and synchronizing. The cards can be ordered with one or two modules to support a variety of avionics databus protocols.
Key Features:
PCI or cPCI form factor
High channel counts
Mixed protocols
IRIG time synchronization
Extended temperatures available
Can be upgraded/reconfigured
Protocols & I/O:
MIL-STD-1553
ARINC 429
ARINC 708
ARINC 717
CSDB
Serial (RS-422/232/423)
Discrete I/O
OmniBus Family
OmniBus is a highly-flexible and high-performance family of avionics databus interfaces combining a selection of industry-standard platforms (PCI/cPCI, VME, PMC and Ethernet/USB) with a wide-viariety of I/O choices (MIL-STD-1553, ARINC 429, ARINC 708, ARINC 717, Serial, CSDB and Discrete). This sophisticated OmniBus design allows users to order the exact number, functionality, and mix of protocol channels that they need. It also lets users upgrade or reconfigure their OmniBus (at the factory) as requirements change.
High-Performance Architecture
OmniBus products are built using an integrated board, core, and module architecture. PCI, cPCI, and Ethernet/USB boards include 1 or 2 cores, VME boards have up to 4, and PMC boards include a single fixed core. Each on-board core has a dedicated protocol processor, IRIG timer, and 3 sync and 3 trigger lines. These cores are the support circuitry for the I/O modules, which contain the interface to the databus protocol(s). Isolating the protocol interface on the I/O module provides the flexibility to create custom, user-specified configurations for single or mixed protocols. The protocol-specific OmniBus architecture provides a better solution with greater performance than general-purpose modular systems (such as IndustryPack™).
COM-1267
PC/104 Switch with five 10/100MB Ethernet ports
The COM-1267 is a versatile five-port Ethernet switch. A cross-over connection can be realized between ports 2 and 3. The board features QoS for DiffServ priority.
The COM-1267 is a versatile 10/100Mbps five-port Ethernet switch that can function in 10BaseT or 100BaseTX modes and allow connections made through onboard RJ-45 connectors. The COM-1267 can be used as a standalone module or integrated within a PC/104 or PC/104-Plus system together with a Eurotech CPU module.
Cross-over connection
The COM-1267 can optionally feature a cross-over connection between Ethernet ports 2 and 3 that can be activated via software, automatically activated when the board is powered off, or activated when a Watchdog signal is received from the host Eurotech CPU module.
COM-1289
Low power 12-channel GPS receiver and Tri-band GSM/GPRS modem PC104 board
The Eurotech COM-1289 is a PC/104 module with GSM/GPRS (optionally GSM-R) wireless cellular connectivity and a low power GPS receiver. A SIM-card can be installed on-board or in an external card carrier. Board configuration is performed in software eliminating banks of configuration, interrupt and base address jumpers. The setup information is stored in an EEPROM.
AIM104-IO32
PC/104 32 Digital TTL I/Os
The AIM-IO32 is an 8-bit PC/104 module providing 32x channels of digital TTL I/O. Each channel can be configured as an input or an output. Outputs are configurable on power-up or reset.
ALUDRA
Single board computer with Atom processor EBX form factor
ALUDRA fan-less processor board provides all the benefits of Intel's new Atom LPIA architecture in an EBX form factor. ALUDRA has on board an Intel 945GSE graphics and memory controller and Intel ICH7-M IO controller hub.
ALUDRA is compatible with all major desktop operating systems and is also available with pre-installed ready to run embedded operating systems including Windows XP Embedded and Fedora Linux.
CPU-1482
PC/104-Plus Rugged Intel Pentium M with 8 USB 2.0 ports
The CPU-1482 is a rugged, efficient embedded board consisting of two modules: a mezzanine CPU module and a PC/104-Plus form factor carrier. It includes a an Intel Pentium M processor running at 1.4GHz with the Intel® i855GME chipset.
The board is available in standard and extended temperature range versions and provides advanced features such as Power Management.
CPU-1484
PC/104-Plus Rugged Intel Pentium M with Gigabit Ethernet
The CPU-1484 is an embedded board consisting of two modules: a mezzanine CPU module combined with a PC/104-Plus form factor carrier.
The mezzanine CPU module features the Intel® Pentium® M 1.4GHz processor and the Intel® i855GME chipset. The system comes with 512MB DDR, 266MHz (PC2100), soldered onboard RAM. No active cooling is required to operate it within the standard and extended temperature ranges.
ISIS XL
PC/104-Plus CPU Module with extended Temperature Intel Atom Low Power
The ISIS XL is a PC/104-Plus CPU board with an Intel Atom Z5xx processor up to 1.3GHz.
The ISIS XL module consists of a PC/104-Plus carrier board coupled with the Catalyst XL module and delivers the same rich feature set of the ISIS board in an extended temperature range. Requiring only 7-8W (typical), the ISIS XL delivers an unprecedented combination of features, performance, low power consumption, ruggedness and compatibility.
Remakable built-in features include an iTrax300 20-channel GPS receiver which provides full position/velocity/time functionality and an integrated security module system from Atmel that is TCG v1.2 compatible.
