Tough Computers for Tough Challenges!
Favorites
AL551
AL551 Intel Atom E3900 3.5" SBC Intel Atom E3900 3.5" SBC 1 DDR3L SODIMM up to 8GB Three independent displays: VGA + LVDS + DP++ Wireless communication: mini PCIe Rich I/O: 2 Intel GbE, 2 COM, 2 USB 3.0, 4 USB 2.0 15-Year CPU Life Cycle Support Until Q1' 31 (Based on Intel IOTG Roadmap) PC104A-AL
PC104A-AL SBC with Intel Atom x5-E3940 Processor DDR3L SODIMM memory up to 8GB Dual Displays: VGA + LVDS Support the PC/104 and PCI-104 connector on board Low Power Consumption: 9.5W PC/104 specification 2.6 Wide operating temp: -40 to 85°C
EHL9A2
EHL9A2 COM Express Mini module COM Express Mini module delivers high performance on a small footprint, which features a 55×84 mm size. It is ideal for space-limited, power-saving, and mobile applications. DFI’s ultra-small modules are available with COM Express pin-out Type 10. Siemens MVB PC/104
Siemens MVB PC/104 MVB Interface Module The MVB PC/104 is an interface module with which it is possible to connect electronic controllers to the MVB. The user of the MVB PC/104 module is provided with API software for their development. The MVB PC/104 connects the parallel PC/104 bus with the serial MVB. Data exchange from the MVB to the PC/104 bus and vice versa is performed via the traffic memory. Arbitration of the traffic memory is performed by the MVBCS1 ASIC. The module is designed for use with a 16-bit CPU with ready acknowledgment. Bytewise accesses to the traffic memory are not possible because of its wordwise organization. Accesses must always be wordwise (only to even addresses).
CH960-CM246/QM370
CH960-CM246/QM370 COM Express Basic module COM Express Basic module provides high-level processing performance and high-speed interfaces for a wide range of computing-demand applications such as medical and industrial automation. DFI’s Basic modules are compatible with COM Express pin-out Type 2, Type 6, and Type 7. PFCQor
PFCQor Power Factor Correction module The PFCQor® Power Factor Correction module is an essential building block of an AC‑DC power supply. Used in conjunction with a holdup capacitor, SynQor’s DC‑DC converters and SynQor’s AC line filter, the PFCQor will draw a nearly perfect sinusoidal current (PF>0.99) from a single phase AC input. The module is supplied completely encased to provide protection from the harsh environments seen in many industrial and transportation environments.
EPS-24G2X
EPS-24G2X Managed 26-Port Gigabit Ethernet Switch with 2x 10G SFP+ Ports The EPS-24G2X is a managed Layer 2+ Ethernet switch based on Diamond’s EPSM-10GX switch module. The switch implements all features of the EPSM-10GX, including 24 10/100/1000Mbps copper ports and 2 10Gbps SFI ports accessed via SFP+ sockets. The EPS-24G2X is designed in the industry-standard «3.5 inch» form factor. The standard cooling method is via a low-profile heat sink. The standard Layer 2+ software embedded in the module provides a comprehensive set of Ethernet switch features suitable for a wide range of industrial applications. All features are manageable via a GUI web interface accessible over any port, as well as with a command language accessed via a built-in RS-232 port. A more advanced software package offering Layer 3 routing performance, as well as IEEE1588 PTP protocol and 1PPS I/O signals, is available upon request. These features are fully supported in the EPSM-10GX hardware and EPS-24G2X product. EPS-24G2X is designed to meet the challenges of vehicle environments with its −40/+85°C operating temperature range and its MIL-STD-202G shock/vibration resistance. Latching connectors are used for all I/O for superior resistance to shock and vibration over the traditional low-cost RJ-45 style connectors. The 50% thicker PCB also aids in resistance to vibration. A wide-range input power supply with built-in transient protection provides compatibility with a range of industrial and vehicle power supplies. EPSM-10GX
EPSM-10GX Ultra-Compact Managed 26-Port Gigabit Ethernet Switch Module The EPSM-10GX is a managed Ethernet switch module in an ultra-compact 2.2″ x 3.3″ (55×84mm) size offering 24x 10/100/1000Mbps copper ports + 2 10Gbps SFI ports. The core Ethernet switching technology is almost fully encapsulated on the module; for many applications, only the «last inch» of magnetics and I/O connectors is required to complete the circuit, enabling easy development of custom form factor compact, rugged Ethernet switch solutions. The small size, based on the industry-standard COM Express Mini form factor, makes EPSM-10GX a perfect choice for use as a building block for creating custom Ethernet switch solutions in a variety of space-demanding applications, such as drones, ground and underwater vehicles, and robots. Two software packages are available, Layer 2+ switching and Layer 3 routing/switching. In addition, IEEE-1588 precision time protocol support is available with a minor modification to support an external precision clock circuit and 1pps signal source provided by the carrier board. All software features are manageable via a GUI web interface accessible over any port, as well as with a command language accessed via a built-in RS-232 port. Two cooling accessory options are available: A heat sink provides convection cooling in a low profile, while a heat spreader provides improved conduction cooling for superior high temperature performance in applications where physical contact with the system enclosure is available. Two high-speed fine-pitch connectors provide all power and data communications between the module and the carrier board. The first connector provides power, 9 10/100/1000 ports, the serial interface, and a serial LED data stream. Applications requiring 9 ports or less may use just this connector. The second connector contains 3 more 10/100/1000 ports, QSGMII signals for an additional 12-port PHY to provide 12 additional 10/100/1000 ports, and the 2 10G SFI ports. EPSM-10GX is designed to meet the challenges of vehicle environments with its 50% thicker PCB, −40/+85°C operating temperature range, and MIL-STD-202G shock/vibration resistance.
cExpress-BT
cExpress-BT COM Express Compact Size Type 6 Module with Intel Atom or Intel Celeron Processor SoC (formerly codename: Bay Trail) The cExpress-BT is a COM ExpressR COM.0 R2.1 Type 6 module supporting the Intel Atom processor E3800 Series and Intel Celeron N2900/J1900 processor SoC (codename: Bay Trail). The cExpress-BT is specifically designed for customers who need high-level processing and graphics performance with low power consumption in a long product life solution. The Intel Atom processor E3800 and Intel Celeron N2900/J1900 processor support non-ECC type DDR3L dual-channel memory at 1066/1333 MHz to provide excellent overall performance. Integrated Intel Gen7 HD Graphics includes features such as OpenGL 3.1, DirectX 11, OpenCL 1.1 and support for H.264, MPEG2, VC1, VP8 hardware decode. Graphics outputs include VGA, DDI ports supporting HDMI/DVI/DisplayPort and optional dual-channel 18/24-bit LVDS. The cExpress-BT is specifically designed for customers with high performance processing graphics requirements who want to outsource the custom core logic of their systems for reduced development time. The cExpress-BT has dual stacked SODIMM sockets for up to 8 GB non-ECC type DDR3L memory. In addition, an onboard miniSD card slot and onboard eMCC memory (optional, 8GB to 64GB) are supported. The cExpress-BT features a single Gigabit Ethernet port, USB 3.0 ports and USB 2.0 ports, and SATA 3 Gb/s ports. Support is provided for SMBus and I2C. The module is equipped with SPI AMI EFI BIOS, supporting embedded features such as remote console, CMOS backup, hardware monitor, and watchdog timer.
Show:
Login / Registration
укажите почту
введите пароль
Forgot password?
By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy
Loading data...
Subscribe to our newsletter
specify your contacts

By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy

You have successfully subscribed
Now you can receive newsletters