MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
ADLQ170HDS
6th Generation Intel Core Iindustrial 3.5" SBC
The ADLQ170HDS is the latest in ADL’s line of high‑performance 3.5″ Intel® Core™ single board computers (SBC). It makes use of 6th generation Intel Core Skylake processors and Intel’s Q170 chipset to provide a robust set of features including 32 GB DDR4 DRAM, 4x SATA 6Gb/s, 4x USB 3.0 and much more.
This makes it ideal for a variety of system-critical industrial applications where these high-performance features are an absolute necessity, but no less critical are less tangible features like high MTBF, long-life availability, hardware and firmware revision control, obsolescence management, technical, engineering and design support.
Applications
Intelligent PC controller for factory automation machinery and equipment, High-Speed Industrial Storage, Very-High/Ultra-High USB 3.0 Vision Processor, Industrial Data Aggregation and Storage, Industrial IoT Gateways and Controllers, Secure Networking Devices, Mobile Telephony, Traffic Engineering, Transportation, Wind Turbine Datalogging and Collision Avoidance, Drone Payload Computing, Oil and Gas IPC and Unmanned Autonomous Systems.
ADLE3900HDС
Intel E3900-Series, 3.5" SBC
The ADLE3900HDC 3.5″ SBC is a reduced I/O, lower cost version of the ADLE3900HD and is based on the Intel E3900-Series SoC Atom. These processors are rated for Tj = −40°C to 110°C making them ideal for a variety of industrial applications such secure networking, IIoT gateway or other industrial use scenarios.
The ADLE3900HDC makes use of Intel’s long-term embedded roadmap and has a planned 15 year availability. This allows for long-life customer applications such as IIoT intelligent control for ICS/SCADA, intelligent machinery, traffic engineering and others.
Applications
Industrial IoT Edge devices, Cyberthreat Security devices, ICS / SCADA devices, Rugged industrial systems, Traffic engineering, Security video surveillance, Small Scale robotics, remote datalogging and man-wearable computing.
ADLE3900HD
Low Power Intel E3900-Series Atom SBC
The ADLE3900HD 3.5″ SBC is based on the Intel E3900‑Series SoC Atom. These processors are rated for Tj = −40°C to 110°C making them ideal for a variety of industrial applications such secure networking, IIoT gateway or other industrial use scenarios.
The ADLE3900HD makes use of Intel’s long-term embedded roadmap and has a planned 15 year availability. This allows for long-life customer applications such as IIoT intelligent control for ICS/SCADA, intelligent machinery, traffic engineering and others.
Applications
Industrial IoT Edge devices, Cyberthreat Security devices, ICS / SCADA devices, Rugged industrial systems, Traffic engineering, Security video surveillance, Small Scale robotics, remote datalogging and man-wearable computing.
ADLE3800SEC
Intel E3800 Series Edge-Connect SBC
Measuring just 75mm x 75mm, the ADLE3800SEC is an embedded SBC specially optimized for Size, Weight, and Power (SWAP) applications. Based on the E3800 series Intel Atom™ SoC, this tiny board delivers maximum performance in the smallest possible size. It features a quad-core processor with up to 2MB onboard cache, and an integrated Intel HD Graphics engine with support for DirectX 11, Open GL 4.0, and full HD video playback.
About Edge-Connect Architecture
Via the backside board-edge connector, additional I/O can easily be made accessible using standard and customer-specific breakout boards. Provides easy expansion and helps reduce cabling, integration time and system size all while increasing quality and overall MTBF.
Connecting to sensors, cameras and storage is easy with a full range of onboard I/O: 2x Gigabit LAN, 1x USB 3.0, 1x USB 2.0, 2x PCie, and SATA. The Intel HD Graphics engine supports video output in either HDMI or Display Port format. An onboard M.2 socket allows users to install the fastest Solid State storage solutions on the market. Extended Temperature Ratings and hard-mounted Edge-Connect design make the ADLE3800SEC ideal for rugged embedded applications.
ADL120S
Stackable SBC - 6th Gen Intel Core
The ADL120S is the latest in ADL’s line of high-performance, compact 120mm x 120mm SBC based on 6th Generation Intel® Core™ i3 / i7 Skylake processors. Featuring Intel Q170 chipset, it is a full-featured SBC with robust I/O including USB 3.0, LAN, M.2 PCIe/SATA and wide operating temperature range (-40°C to 85°C) and high-resolution DisplayPort outputs. Eight PCIe X1 expansion lanes allow for customization for any application-specific environment.
This makes it ideal for a variety of system-critical industrial applications where these high-performance features are an absolute necessity, but no less critical are less tangible features like high MTBF, long-life availability, hardware and firmware revision control, obsolescence management, technical, engineering and design support.
Applications:
Secure Networking, Secure Routing, Traffic Monitoring and Gateways, Cyber Security Edge Devices for ICS and SCADA threat security, Unmanned and Drone Payload Computing, Industrial IoT Gateways and Controllers, Traffic Engineering, Security and Surveillance USB 3,0 and IP Camera CPU Interface, Transportation, Wind Turbine Datalogging and Collision Avoidance, Oil and Gas IPC, Unmanned Autonomous Systems.
ADLE3900SEC
Intel E3900 Series Edge-Connect SBC
Measuring just 75mm x 75mm, the ADLE3900SEC is an embedded SBC specially optimized for Size, Weight, and Power (SWAP) applications. Based on the E3900 series Intel Atom™ SoC, this tiny board delivers maximum performance in the smallest possible size. It features low-power quad and dual core Atom processors with integrated Intel HD Graphics engine capable of DisplayPort video output = 4K resolution at 60 Hz.
The ADLE3900SEC is rated for −40°C to 85°C operation with rugged options available including chamber testing, underfill, bonding, and conformal coating.
About Edge-Connect Architecture
Via the backside board-edge connector, additional I/O can easily be made accessible using standard and customer-specific breakout boards. Provides easy expansion and helps reduce cabling, integration time and system size all while increasing quality and overall MTBF.
Connecting to sensors, cameras and storage is easy with a full range of onboard I/O: 2x Gigabit LAN, 1x USB 3.0, 1x USB 2.0, 2x PCie, and SATA. The Intel HD Graphics engine supports video output in either HDMI or Display Port format. An onboard M.2 socket allows users to install the fastest Solid State storage solutions on the market. Extended Temperature Ratings and hard-mounted Edge-Connect design make the ADLE3900SEC ideal for rugged embedded applications.
Applications:
Industrial IoT Edge devices, Cyberthreat Security devices, ICS / SCADA devices, Rugged Industrial Systems, Traffic Engineering, Security Video Surveillance, Small Scale Robotics, Remote Datalogging, Man-Wearable Computing.
ADLVIS-1660
Coaxpress PCIE/104 solution
The ADLVIS-1660 Dual CXP-6 is a rugged, small form factor (SFF) CoaXPress solution intended for military and industrial applications. It’s a two-board small form factor PCIe/104 solution featuring a Quad Intel i7-4700EQ processor with a dual CXP-6 module using the x16 PCIe/104 bus resulting is a stunning 1,250 MB/s effective camera bandwidth.
The ADLVIS-1660 features include small outline coaxial cabling for DIN1.0/2.3 connectors optimized for SFF design. It supports PoCXP, is GENICAM compliant and includes Euresys Memento event logging for efficient application software development. A second CXP-6 module can easily be added to support four 1xCXP-6 cameras or two 2xCXP-6 cameras.
The ADLVIS-1660 targets rugged, small form factor industrial high-performance vision solutions in a host of military and industrial environments. It enables very high-definition applications as well as high-framerate applications in less than ideal environments for security and surveillance, traffic management, science, machine vision and a vast range of next-generation vision products.
Applications: Hyperspectral Imaging, Traffic Surveillance, Security Monitoring and Control, Unmanned Systems — High-Resolution Image/Video Capture, High-Speed Automated Optical Inspection, Very High-Resolution Line-Scan Image Acquisition, Military and Defense ISR, High Frame-Rate Motion Analysis and Recording.
ADLMES9200
3- and 5-card rugged chassis systems
The rugged ADLMES9200 IP67 chassis is a successor to ADL’s popular ADLMES8200 IP65 chassis system. Improvements include lower weight, lower cost, quick and reliable IP67 integration for rugged military and industrial applications. Design features for military / defense system include MIL-STD 810 tolerance and MIL-STD 461/704/1275 compliance capability.
The ADLMES9200 is compatible with all ADL’s full range of Intel-based PC/104 and 3.5″ SBC’s which range from low-power ATOM to the latest Intel Core i5/i7 processors. Power supply options include ADL’s range of long-life (MTBF>500,000 hrs) with options for MIL-STD 461/704/1275 compliant filtering.
The uni-body design, with minimal, reliable EMC-compliant gasketing makes for better IP67 Ingress protection as well as assembly. Full design and development services are available for chassis customization, cabling, integration and modeling support.
Applications
Rugged: Ground Vehicles, Mission / Payload Computing, Secure Communications, SWaP-constrained systems for mobile, airborne and vehicle
Rugged Industrial: Oil and Gas, Road Construction and Inspection, Mining, Agriculture
ADLLAN
2x PC/104-Plus Ethernet LAN
The Intel 82541ER Gigabit Ethernet Controller provides optimized Gigabit networking for PCI designs. This highly efficient controller, with enhanced power management, consumes less than 1.0W of power at Gigabit speeds. When no signal is detected on the wire, the controller reduces power consumption by «downshifting» to 100Mbps to 10Mbps and then powering down the physical- layer circuitry (PHY).
When a signal is detected, the controller automatically negotiates the connection to Gigabit, if available.
The Intel 82541ER combines Intel’s fifth-generation Gigabit MAC design with fully integrated state-of-the-art PHY technology, which meets or exceeds IEEE 802.3ab specifications for Bit Error Rate performance.
Mesa 4I24
72/96 bit parallel I/O cards
The MESA 4I24 series of cards are 96 or 72 bit parallel I/O interfaces implemented on the PC/104 bus.
The 4I24 uses 4 (4I24, 4I24I) or 3 (4I24M) socketed 82C55 PIO chips to give for a total of 96 I/O bits (4I24, 4I24I) or 72 I/O bits (4I24M). 3.3K Pullup resistors are provided on all ports to simplify interfacing to contact closure, opto-isolators, etc.
The 4I24 series includes three models with different I/O connectors. The standard 4I24 uses two 50 pin headers for I/O connections. The 50 pin connectors each have 48 I/O bits, ground, and power. The 4I24I uses four 26 pin headers with ISO standard pinout (24 I/O bits per 26 pin connector, pin 2 = GND, pin 26= 5V). The 4I24M has I/O module rack compatible pinouts with three 50 pin connectors each having 24 I/O bits with interleaved grounds. 5V power on the I/O connectors is fused on the 4I24.
All 4I24 models use the 16 bit stack through type PC/104 bus architecture. Four layer circuit card construction is used to minimize radiated EMI and provide optimum ground and power integrity. All CMOS design keeps power consumption to a minimum.
