MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
Mesa 4I20
PC/104 card with 24 open drain 350 mA outputs
The 4I20 is a stackable PC/104 card with 24 open drain 350 mA outputs for solenoids, valves, relays, motors, incandescent lamps and other medium power DC loads.
The 4I20 outputs are galvanically isolated from logic ground to avoid ground loops, as the total ground return current be as much as 8.4 amps. The isolation also allows the 4I20 to drive ground referred loads.
Mesa 4I23
Quad Serial Board
The 4I23 is a low cost, four channel serial port card on a stackable PC/104 bus card. The 4I23 is available in three versions: quad RS-232, quad RS-422, and a model with two RS-232 and two RS-422 channels.
The 4I23 uses 16C550 type FIFO'ed UART's. These UART's have built-in 16 byte receive and transmit FIFO's. The 16 character FIFO's reduce interrupt overhead and allow higher data rates without losing characters. The receive FIFO's also increase the allowable interrupt latency. This is especially important when using programs like WINDOWS that disable interrupts for comparatively long periods of time.
Unlike many serial cards, the 4I23 is implemented with the 16 bit bus connector so that each of the four serial ports on the 4I23 can use any of the 11 available AT bus interrupts.
PCM-C418
PC/104 Single Board Computer
WinSystems’ PCM-C418 single board computer (SBC) is a PC104 form factor featuring the latest generation DM&P Vortex86DX3 SOC processor. Its small size, low power, rugged design, and extended operational temperature range make it a great fit for industrial IoT applications and embedded systems in the industrial control, transportation, Mil/COTS, and energy markets.
SBC35-C398Q-2-0
Quad-Core Freescale i.MX 6Q Cortex A9 Industrial ARM® SBC
WinSystems’ SBC35-C398Q quad-core single board computer combines high performance multimedia graphics with a rich mix of industrial I/O. The Freescale i.MX 6Q processor’s integrated power management provides excellent efficiency and allows operation from -40° to +85°C without active cooling. It is designed for demanding graphical applications in security, transportation, medical, and digital signage.
MX200
Solid State Drive
When the Crucial MX100 was released, it set a new standard for SSDs that the Crucial MX200 pushes even further. Leveraging leading specs on all fronts, along with new Dynamic Write Acceleration technology, the Crucial MX200 is loaded with innovative features and immediately increases your system's performance.
The Crucial MX200 delivers 550 MB/s sequential reads on both compressible and incompressible data, and outperforms a typical hard drive by 400 MB/s. Even better, the performance doesn't let up, as the Crucial MX200 posts an endurance rating that's up to 5 times greater than a typical client SSD.
Competing SSDs typically rely on a fixed cache of multi-level cell flash memory, which allows you to write sequential data at published specs, but only for so long. Our industry-leading Dynamic Write Acceleration technology solves this problem by using an adaptable pool of high speed, single-level cell flash memory for consistently fast performance that doesn't let up.
Our engineers created RAIN technology to protect your data at the component level, similar to how RAID is used with multiple hard drives. This technology increases the security and protection of your data to a level that's rarely seen in consumer-class SSDs.
Keep personal files and sensitive information secure from hackers and thieves with AES 256-bit encryption the same grade used by banks and hospitals. The Crucial MX200 meets or exceeds all industry encryption standards, including Microsoft eDrive, IEEE-1667, and TCG Opal 2.0.
With Extreme Energy Efficiency technology, the Crucial MX200 is nearly 2x more energy efficient than a typical hard drive.
When a photo or file gets corrupted, it often becomes unusable. Prevent this from happening in the first place with the Crucial MX200, which arms every storage component with four layers of Exclusive Data Defense.
Adaptive Thermal Protection technology enables the Crucial MX200 to dynamically adjust storage component activity based on how you're using the drive, allowing your storage system to stay cool.
JTF Series
Component power supply
8-15 Watts
High Power Density
Wide 4:1 Input Range
Operating Temperature -40 °C to +105 °C
Single & Dual Outputs
Standard Remote On/Off
1600 VDC Isolation
AL551
Intel Atom E3900 3.5" SBC
Intel Atom E3900 3.5" SBC
1 DDR3L SODIMM up to 8GB
Three independent displays: VGA + LVDS + DP++
Wireless communication: mini PCIe
Rich I/O: 2 Intel GbE, 2 COM, 2 USB 3.0, 4 USB 2.0
15-Year CPU Life Cycle Support Until Q1' 31 (Based on Intel IOTG Roadmap)
PC104A-AL
SBC with Intel Atom x5-E3940 Processor
DDR3L SODIMM memory up to 8GB
Dual Displays: VGA + LVDS
Support the PC/104 and PCI-104 connector on board
Low Power Consumption: 9.5W
PC/104 specification 2.6
Wide operating temp: -40 to 85°C
COM335
COM Express Carrier Board
DFI’s carrier board (also known as base board or evaluation board) offers a flexible engineering development environment for COM Express Type 10, Type 7, Type 6, Type 2, and Qseven. Which helps our customers minimize integration requirements while reducing development time and cost.
EHL9A2
COM Express Mini module
COM Express Mini module delivers high performance on a small footprint, which features a 55×84 mm size. It is ideal for space-limited, power-saving, and mobile applications. DFI’s ultra-small modules are available with COM Express pin-out Type 10.
