MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
StrongBox-M
Rugged Portable Computer
Ultimate Multimedia Rugged Solution
The StrongBox-M is definitely the most reliable and rugged portable multimedia system on the market. It is built on an extremely rugged 100% aluminum alloy unit, reinforced with shock absorbing rubber corners and an impact-resistant protective glass.
It also offers sophisticated monitoring/control and multimedia features, making this ruggedized portable system the ultimate choice for maximum industrial protection, portability, and flexibility under critical applications and harsh environments, where multimedia and advanced monitoring capabilities are required.
The StrongBox-M is offered with ATX motherboard c/w 6 full slots, PCI, PCI/PCIe, PCI/PCI-X or PCI/ISA architecture and an Intel Pentium 4 CPU
COM335
COM Express Carrier Board
DFI’s carrier board (also known as base board or evaluation board) offers a flexible engineering development environment for COM Express Type 10, Type 7, Type 6, Type 2, and Qseven. Which helps our customers minimize integration requirements while reducing development time and cost.
EHL9A2
COM Express Mini module
COM Express Mini module delivers high performance on a small footprint, which features a 55×84 mm size. It is ideal for space-limited, power-saving, and mobile applications. DFI’s ultra-small modules are available with COM Express pin-out Type 10.
PCAN-USB FD
CAN and CAN FD Interface for High-Speed USB 2.0
The CAN FD adapter PCAN-USB FD allows the connection of CAN FD and CAN networks to a computer via USB. A galvanic isolation of up to 500 Volts decouples the PC from the CAN bus. The simple handling and its compact plastic casing make the adapter suitable for mobile applications.
The new CAN FD standard (CAN with Flexible Data rate) is primarily characterized by higher bandwidth for data transfer. The maximum of 64 data bytes per CAN FD frame (instead of 8 so far) can be transmitted with bit rates up to 12 Mbit/s. CAN FD is downward-compatible to the CAN 2.0 A/B standard, thus CAN FD nodes can be used in existing CAN networks. However, in this case the CAN FD extensions are not applicable.
The monitor software PCAN-View and the programming interface PCAN-Basic for the development of applications with CAN connection are included in the scope of supply and support the new standard CAN FD.
ISO / Non-ISO CAN FD:
Since the first implementations of CAN FD, the protocol has been improved and is now included in the standard ISO 11898-1. The revised CAN FD standard is not compatible with the original protocol.
PEAK-System takes this into account by supporting both protocol versions with their CAN FD interfaces. If required, the user can switch to the CAN FD protocol used in the environment by software (Non-ISO and ISO).
PCAN-PCI/104-Express
CAN Interface for PCI/104-Express
The PCAN-PCI/104-Express card enables the connection of one, two, or four CAN busses to a PCI/104-Express system. Up to four cards can be stacked together. The CAN bus is connected using a 9-pin D-Sub plug on the slot brackets supplied.
There is galvanic isolation of up to 500 Volts between the computer and CAN sides. The card is available as a single, dual, or four-channel version.
The package is also supplied with the CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.
Siemens MVB PC/104
MVB Interface Module
The MVB PC/104 is an interface module with which it is possible to connect electronic controllers to the MVB.
The user of the MVB PC/104 module is provided with API software for their development.
The MVB PC/104 connects the parallel PC/104 bus with the serial MVB. Data exchange from the MVB to the PC/104 bus and vice versa is performed via the traffic memory. Arbitration of the traffic memory is performed by the MVBCS1 ASIC.
The module is designed for use with a 16-bit CPU with ready acknowledgment. Bytewise accesses to the traffic memory are not possible because of its wordwise organization. Accesses must always be wordwise (only to even addresses).
PCE-7129
6th Generation Intel Core processor-based platform
PCE-7129/5129/5029 is a PICMG 1.3 form-factor single host board, which is designed with Intel C236 (PCE-7129), Q170 (PCE-5129), and H110 (PCE-5029) PCH for industrial applications that need high computing power and strong I/O capability.
PCE-7129/5129/5029 supports 14nm manufacturing technology, LGA1151 socket Intel Core i7/i5/i3, Pentium and Xeon processors that integrate memory and graphic controllers, and support for DDR4 2133 SDRAM up to 32 GB. Within advanced computing technology, PCE-7129/5129/5029 is suitable for processor hungry industrial applications.
PCE-7129/5129/5029 offers excellent graphics capability with its integrated Intel HD graphics core with a minimum 1 GB shared memory (requires a minimum 2GB system memory). With this, PCE-7129/5129/5029 provides strong 2D/3D graphics processing power without an additional graphic card to save extra cost, power consumption and thermal integration effort.
PCE-7129/5129/5029 features rich I/O interface: M.2 which can support M.2 (2280) type-M for both SATA3.0 (6 Gb/s) and PCIex4 (Gen3.0; 32 Gb/s) devices, SATA 3.0 ports with SW raid 0, 1, 5, 10 (PCE-5029 do not support RAID), integrated USB 3.0 controllers @ 5Gbps, 2 x RS-232 serial COM ports. Moreover, PCE-7129/5129/5029 can support Advantech PCE-5BXX and PCE-7BXX (PCE-7129 only) series backplanes offering various combinations of expansion such as PCI, PCI-X and PCIe slots.
With flexible I/O and graphic expansibility, PCE-7129/5129/5029 is an excellent, cost effective graphic or I/O oriented workstation class hardware platform. With outstanding performance and exceptional features, PCE-7129/5129/5029 is the ideal computing platform for advanced industrial applications.
CH960-CM246/QM370
COM Express Basic module
COM Express Basic module provides high-level processing performance and high-speed interfaces for a wide range of computing-demand applications such as medical and industrial automation. DFI’s Basic modules are compatible with COM Express pin-out Type 2, Type 6, and Type 7.
PFCQor
Power Factor Correction module
The PFCQor® Power Factor Correction module is an essential building block of an AC‑DC power supply. Used in conjunction with a holdup capacitor, SynQor’s DC‑DC converters and SynQor’s AC line filter, the PFCQor will draw a nearly perfect sinusoidal current (PF>0.99) from a single phase AC input. The module is supplied completely encased to provide protection from the harsh environments seen in many industrial and transportation environments.
DXStream-HDMI
Ultra Low Latency Standalone H.264 Streaming Client
The DXStream-HDMI is an intelligent, stand-alone, ultra-low latency H.264 streaming client that receives, decodes, and displays H.264 encoded video streams. The DXStream‑HDMI supports the industry standard RTP/RTSP protocols for streaming data via the integrated 100/1000MBit Ethernet connection. This SWaP optimised solution is ideal for rapid deployment in demanding applications in Military, Communications, Transportation, Mining and Energy industries.
The DXStream-HDMI features a dedicated hardware decode engine capable of decoding up to 1080p60 H.264 video at full size and full frame-rate with Ultra Low Latency (under 60ms). The intelligent streaming client is configured via a web interface and once configured the DXStream-HDMI runs autonomously without any user interaction.
The DXStream-HDMI is an intelligent stand-alone device with it’s own on-board CPU and does not require a host CPU or any driver or OS software. For mechanical convenience, the module can be mounted on a PC/104 stack without consuming host CPU resources.
Highlights
Real-time H.264 decode at up to 1080p60
Ultra Low Latency technology with latency below 60ms
H.264/MPEG-4 AVC (Part 10) Decoder
HDMI/DVI output
RTSP/RTP streaming protocol support
Single, rugged, real-time video streaming client solution
Stand-alone operation
Web interface for configuration
Standard PC/104 mechanical form factor
Applications
All-round Real-Time Situational Awareness
Real-time video feedback from remote platforms
Unmanned vehicles (UAV, ROV)
Real-time IP video distribution
Remote Video Surveillance
Border Security
Traffic Monitoring and Control
