MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
PCI-7841/cPCI-7841
Dual-port Isolated CAN Interface Cards
The PCI-7841/cPCI-7841 is a Controller Area Network (CAN) interface card. It supports a dual-port CAN’s interface that can run independently or bridged at the same time.
The built-in CAN controller of this card is Philips SJA1000, which provides bus arbitration and error detection with auto correction and re-transmission function.
PCI-9114
32-CH 16-Bit Up to 250 kS/s Multi-Function DAQ Cards
ADLINK PCI-9114 series are 32-CH, 16-bit, high resolution multi-function DAQ Cards. The PCI-9114 device features flexible configurations on analog input.
The devices are divided into 2 kinds: normal gain version and high gain version. Both versions provide 4 programmable input ranges for bipolar and unipolar inputs. The A/D on the PCI-9114DG device features a sampling rate of 100 kS/s with resolution at 16 bits, while PCI-9114A-DG/HG device features a sampling rate of up to 250kS/s with resolution at 16 bits.
The device supports automatic analog input scanning, and offers a differential mode for 8-CH analog inputs and maximum noise elimination, as well as single-ended modes for 16- CH analog inputs. The PCI-9114 also features 1-CH 16-bit general purpose timer/counter, 16-CH TTL isolated digital inputs and 16-CH TTL isolated digital outputs.
ADLINK PCI-9114 delivers cost-effective and reliable data acquisition capabilities and is ideal for a broad variety of applications.
PCI-9113A
32-CH 12-Bit 100 kS/s Isolated Analog Input Card
ADLINK PCI-9113A is a 32-CH, 12-bit, 100 kS/s isolated analog input card.
The PCI-9113A provides analog inputs with 3 programmable input ranges for both bipolar and unipolar inputs. The 32-CH single-ended analog inputs can be converted to 16-CH differential analog inputs, which improve the noise rejection in harsh industrial environments.
The analog inputs are isolated from the PC’s system ground. This feature not only protects the PC from being damaged from surges on the signal lines, but also eliminates ground loops and common-mode problems commonly seen in industrial measurement applications.
The PCI-9113A provides custom circuit area for input signal conditioning. Either signal attenuation or filtering can be applied on per channel basis.
With all the features, ADLINK PCI-9113A delivers cost-effective and reliable data acquisition capabilities for ATE, sensor monitoring, data logging, power transmission, and a broad variety of industrial measurement applications.
PCI-9112
16-CH 12-Bit 110 kS/s Multi-Function DAQ Card
The PCI-9112 is a 12-bit, 110KHz, multifunction DAS data acquisition card. The PCI-9112 DAS card uses state-of-the-art technology, making it ideal for data logging and signal analysis applications in medicine, process control, etc.
PCI-9111 Series
16-CH 12/16-Bit 100 kS/s Low-Cost Multi-Function DAQ Cards
ADLINK’s PCI-9111 series are 16-CH, 100 kS/s low-cost multi-function DAQ cards that feature flexible analog input configurations.
An RC filter is implemented on each A/D input channel to allow attenuation or filtering of the input signals.
The PCI-9111 series provide analog inputs with 5 programmable input ranges for bipolar inputs. The PCI-9111 series also support automatic analog input scanning.
The PCI-9111DG provides 12-bit A/D resolution while the PCI-9111HR provides 16-bit A/D resolution. The PCI-9111 series also feature 1-CH 12-bit analog output, 16-CH TTL digital inputs and 16-CH TTL digital outputs.
ADLINK’s PCI-9111 series delivers cost-effective and reliable data acquisition capabilities, and is ideal for a broad variety of applications.
cPCI-9116
64-CH 16-Bit 250kS/s Multi-Function DAQ Card
64-CH 16-Bit 250kS/s Multi-Function DAQ Card.
Features:
3U/6U Eurocard form factor, CompactPCI compliant (PICMG 2.0 R2.1)
16-Bit A/D resolution, up to 250 kS/s sampling rate
Up to 250 kS/s sampling rate
64-CH single-ended or 32-CH differential inputs
Onboard 1 k-sample A/D FIFO
Bipolar or unipolar analog input ranges
Programmable gains of x1, x2, x4, x8
512-configuration channel-gain queue
Bus-mastering DMA for analog inputs
8-CH TTL digital inputs and 8-CH TTL digital outputs
1-CH 16-Bit general purpose timer/counter
DAQ-2000 Series
4-CH, 14/16-Bit, Up to 2 MS/s Simultaneous-Sampling Multi-Function DAQ Cards
Adlink DAQ-2010, DAQ-2005 and DAQ-2006 are simultaneous-sampling multifunction DAQ cards to meet a wide range of application requirements.
The devices can simultaneously sample 4 AI channels with differential input configuration in order to achieve maximum noise elimination. They also provide 2-CH 12-bit analog outputs with waveform generation capability, which can be performed together with analog input functions.
If more analog input or output channels are required, multiple cards can be synchronized through the SSI (system synchronization interface) bus. This makes the DAQ-2000 series ideal for the stimulus/response test.
The DAQ-2000 series also feature analog and digital triggering, 24-CH programmable digital I/O lines, and 2- CH 16-bit general-purpose timer/counters. The auto-calibration functions adjust the gain and offset to within specified accuracies such that you do not have to adjust trimpots to calibrate the cards.
PCIe-U300 Series
4/8/12-ch PCI Express x4 Gen2 USB3 Vision Top Performing Frame Grabbers
Adlink’s PCIe-U300 Series is a PCI Express x4 Gen2 USB3 Vision frame grabber supporting 4/8/12 USB 3.1 Gen 1 ports for multiple USB3 Vision device connections with data transfer up to 5 Gb/s per port.
The PCIe-U300 Series supports 5V and up to max. 1500mA current per port for external USB3 Vision industrial cameras. To guarantee industrial-grade high-bandwidth performance for each port, four independent Fresco FL1100 USB 3.1 Gen 1 host controllers with PCI Express x4 Gen2 interface allow each USB port to provide up to 5Gbps bandwidth when operating four ports simultaneously. It also supports software-programmable per-port power on/off control for fault recovery operations.
ADLINK’s PCIe-U300 Series provides excellent capability to interface with USB 3.0 devices for machine vision, factory automation, quality assurance, logistics, medicine, and security and traffic surveillance applications.
PCIe-GIE7xP Series
2/4-CH PCI Express GigE Vision PoE+ Frame Grabbers with PoE Power Management & Protection
Adlink’s PCIe-GIE7xP series PCI Express PoE+ frame grabber supports 2/4-CH independent Gigabit Ethernet ports for multiple GigE Vision connections transferring up to 1 Gb/s per port. PoE+ provides up to 30W power and automatic detection for stable, reliable connections, reducing costs, simplifying installation, and easing maintenance burdens.
Multi-card Capture Capability
Any number of PCIe-GIE7xP series cards can be installed in a single system without occupying any I/O resources, for multicard singlesystem machine vision grabs. A wide operating temperature range supports integration with fanless computers for Industrial Automation applications in harsh environments.
Comprehensive PoE Protection Secures Assets
Exclusive comprehensive PoE Protection prevents overcurrent and overvoltage, and automated power budget control adjusts PoE port power supply automatically, avoiding equipment damage.
Smart PoE Management
Easy-to-use utility and API provide real-time PoE status monitoring and control, lowering maintenance costs and predicting possible failure in advance, while PoE power priority selection and PoE-based power on/off support more demanding applications.
CM3-BT1
Extreme Rugged PCI-104 Single Board Computer with Intel Atom Processor E3800 Series SOC
The CMx-BTx is a PC/104-based, Single Board Computer (SBC), fully compliant with the PCI-104 Specification, Version 1.1 and partially compliant with the PC/104 Specification, Version 2.6.
PC/104 SBCs are very compact and highly integrated computers. This SBC features the 22nm, Intel Bay Trail SoC. The board provides a DDR3L SO-DIMM socket, a PC/104 connector, a PCI-104 connector, three USB 2.0 ports, up to two Gigabit Ethernet ports, up to two SATA 3 Gb/s ports, one dedicated HD-Audio panel connector, one VGA port, one LVDS port, up to four COM ports, one mini-PCIe slot (with one USB 2.0 port included).
The CMx-BTx can be run with only 5 volts and is capable of running operating systems like DOS, Windows 7/8 in either 32-bit or 64-bit configuration, Linux, VxWorks, and others.
Another feature included on the board is a fail safe BIOS that enables the user to start the module even if the original BIOS is corrupted.
