MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
CANpro/104-Plus Opto
PC/104-Plus CAN Controller
Connect Tech’s CANpro/104-Plus Opto offers two powerful NXP SJA1000 CAN controllers and 3kV optical isolation to provide maximum protection for your industrial control applications.
An extension of Connect Tech’s current CAN controller product line, CANpro/104-Plus Opto is based on a PC/104-Plus bus. The design frees up valuable I/O space offering you greater flexibility within your embedded system. For even more I/O, CANpro/104-Plus Opto includes an 8-bit GPIO header.
Dependability, high data rates, network control capabilities and 3kV optical isolation protection make CANpro/104-Plus Opto the ideal choice for industrial control applications that are exposed to harsh conditions or environments.
Xtreme/104-Plus
PC/104-Plus Serial Card
High performance and versatility are trademarks of the Xtreme/104 PC/104 serial card family. Now the Xtreme/104-Plus offers more choice for your embedded applications requiring a small footprint, but fast data transfer rates. The Xtreme/104-Plus is available with 4 or 8 high speed asynchronous RS-232/422/485 ports, 8 selectable RS-232/422/485/TTL ports, or choose 2 or 4 dedicated RS-423 ports.
High performance UARTs provide each port with large data buffering capabilities, and each port on the switchable models can be configured for electrical interface, baud rate, parity, data and stop bits independently. The Xtreme/104-Plus is the perfect combination of flexibility, high performance and cost-effectiveness.
CANpro/104 Opto
PC/104 CAN Controller
Connect Tech CANpro/104 Opto combines the power of two NXP SJA1000 CAN controllers with the compact size and rugged stability of PC/104.
This CAN controller card features fail-safe power-up/power-down and on-board high input impendence transceivers to maximize nodes on the bus. Jumperable slew rate limiting reduces radiated emissions. 3kV of optical and power isolation ensure your data is protected from disruptions that can occur with exposure to harsh conditions or environments.
Dependability, high data rates and network control capabilities make CANpro/104 Opto ideal for industrial control applications.
All Connect Tech PC/104 CAN Controller cards include lifetime warranty and free technical support.
PCI to PC/104-Plus Adapter
Passive extender card
This passive extender card allows developers to mount a PCI-104 or PC/104-Plus card into a Universal PCI bus system. The adapter is equipped with a stack-through connector so the test card can be installed on either side (model ADG001), enabling probing on the front or the back. The design also allows cables to exit from the host PC for easy connection to external devices.
PCI Dump Switch Card
This handy development tool will pay for itself the first time you push the button. It is essential hardware for the system of every developer working on programs such as device drivers or interrupt handlers.
When a system freezes during software programming and testing, a hardware reset results in the loss of crucial system information, along with valuable development time. The Universal PCI Dump Switch card increases your productivity by eliminating the guess work normally required to debug the cause of the system hang. It includes an exterior push button to trigger a Non-Maskable Interrupt (NMI), which will enable a crash dump, or drop you into your operating systems debugger.
With this card, a software debugger can troubleshoot events even when the bug causes a complete lock of the operating system. (The PCI Dump Card does not reset the host computer.)
Echo/ISA
Serial Communications Adapter
The Echo/ISA is an 8 port serial card designed for those needing continued support for ISA bus based systems. Multiple Echo boards can reside in a system to accommodate large multi-channel I/O requirements. This flexible solution enables independent configuration of each port’s baud rate, parity, data and stop bits, and supports the most popular operating systems.
PCIEcan 2xCAN v3
CAN multi-channel real time CAN interface with two CAN/CAN FD channels
Kvaser PCIEcan 2xCAN v3 is a small, yet advanced, CAN multi-channel real time CAN interface that handles transmission and reception of standard and extended CAN messages on the bus with a high time stamp precision. The Kvaser PCIEcan 2xCAN v3 is compatible with applications that use Kvaser‘s CANlib.
Major features
PCI Express CAN interface
Supports CAN FD, up to 8 Mbit/s
Quick and easy plug-and-play installation
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
100 % compatible with applications written for other Kvaser CAN hardware with Kvaser CANlib
High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit /s
Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet
Support for SocketCAN
Supports silent mode for analysis tools — listen to the bus without interfering
Supports simultaneous usage of multiple Kvaser interfaces
Low profile board, includes low and high profile brackets
U100P-X3
Single-channel CAN/CAN FD to USB interface with reinforced galvanic isolation
The Kvaser U100P-X3 is a robust, single-channel CAN/CAN FD to USB interface with reinforced galvanic isolation (Tested according EN 60335) that squarely addresses the needs of the evolving automotive development market.
Fully compatible with J1939, CANopen, NMEA 2000® and DeviceNet, this is the first in a new range of interfaces that is also suited to rugged applications in marine, industrial, heavy duty vehicle and heavy industries.
The Kvaser U100P is also available with 9-pin D-SUB, J1939 or M12 CAN connectors.
U100-X3
Single-channel CAN/CAN FD to USB interface with reinforced galvanic isolation
The Kvaser U100-X3 is a robust, galvanically-reinforced (Tested according EN 60335) single-channel CAN/CAN FD to USB interface with a 16-pin OBDII plug.
Signal and power isolated, the Kvaser U100 offers enhanced electrical protection, a vibration, shock and drop-proof housing and high-quality cabling that meets the needs of CAN system developers through to service technicians.
With an intelligent LED that displays bus loads and error frames, an industry-leading IP67 rating and an innovative connector system, the U100 has numerous stand-out features. Fully compatible with J1939, CANopen, NMEA 2000® and DeviceNet, this suits rugged and higher voltage applications in marine, industrial, construction, heavy-duty, agriculture and automotive, including electric vehicle markets.
The Kvaser U100 is also available with 9-pin D-SUB, J1939-13 Type II or M12 CAN connectors.
DIN Rail SE410S-X10
Ethernet to CAN/CAN FD interface for DIN Rail mounting
Kvaser DIN Rail SE410S-X10 is a powerful Ethernet to CAN/CAN FD interface with support for Kvaser t programs. It has 4 CAN/CAN FD channels, support for I/O via add-on modules and 16GB flash storage. Kvaser DIN Rail SE410S-X10 acts as a master for the add-ons. The housing has a smart mounting clip that attaches to a DIN rail for easy installation.
The communication between the I/O modules and the Kvaser DIN Rail SE410S-X10 uses an optical bus, thus there is no need for cables in between. The I/O modules can be controlled either from Kvaser’s CANlib SDK (over Ethernet) or directly on the unit using Kvaser t programs. The Kvaser DIN Rail SE410S-X10 is compatible with applications that use Kvaser’s CANlib SDK.
