MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
cPCI-3520
3U CompactPCI Intel Xeon E/ 9th Gen Intel Core Processor Blade
The ADLINK cPCI-3520 Series is a 3U CompactPCI processor blade with soldered DDR4-2666 ECC memory of up to 32GB. The ADLINK cPCI-3520 features the Intel Xeon E, 8th/9th Gen Intel Core and Intel Celeron G processor (formerly Coffee Lake-H) with Mobile Intel CM246 Chipset. (Supports ECC memory dependent on processor).
The cPCI-3520 Series is a 3U CompactPCI blade available in single-slot (4HP), dual-slot (8HP) or triple-slot (12HP) width form factors with various daughter boards to provide a broad range of I/O requirements. Faceplate I/O in the single-slot (4HP) version includes 1x DVI-I, 2x GbE and 1x USB 3.0 port (these I/O are common to all versions). Faceplate I/O in the dual-slot (8HP) version includes additional 2x USB 2.0, 1x COM, 1x KB/MS and Line-in/Line-out on the cPCI-3520D or additional 2x DisplayPorts, 1x COM in RJ-45 connector, 1x KB/MS and 1x additional USB 2.0 port on the cPCI-3520G. Two more dual-slot options are the cPCI-3520L with additional 2x GbE, 1x COM and 2x USB and the cPCI-3520M with one 100-pin high density connector supporting additional 2x DVI-D, 2x USB 2.0, 2x COM, 2x KB/MS and Line-in/Line-out ports.
Graphics support is integrated on the CPU and allows 3 independent displays on the faceplate by selecting the cPCI-3520G with additional 2x DisplayPorts. Storage includes a CFast slot, mSATA socket or a 32GB onboard SSD and 2.5″ SATA drive on the layer 2 daughter board (cPCI-3520D/L/M/P). One optional PCI 32-bit/66MHz PMC site or PCIe x1 XMC site is available on the 8HP or 12HP versions (cPCI-3520S or cPCI-3520P).
Rear I/O signals to J2 include 4x PCIe x1, 3x SATA 3 Gb/s, and 3x USB 2.0. 3x GPIO and SMBus signals are also routed to the J2 connector. The optional Rear Transition Module (RTM) provides 3x SATA, 2x GbE, 2x USB, 1x COM (Tx/Rx), and 1x VGA port.
The cPCI-3520 is a high-performance solution for factory automation and other industrial applications that require superior data transfer capability and advanced computing power. The ADLINK cPCI-3520 provides high manageability, supports Satellite mode operation as a standalone blade in peripheral slots, and IPMI for Preliminary 2 Introduction system health monitoring. A GbE port on the faceplate supports Intel AMT 9.0 for remote monitoring.
cPCI-3534/3538-S
4/8-port Asynchronous Serial Communications Modules
The cPCI-3534 is an enhanced four ports serial communication module used for Compact-PCI platform. It includes a PGA (Programmable Gate Array) to support the serial communication controller and a 37-pin connector to connect external I/O port from the front panel or using the rear IO.
The expansion cable has four standard DB25 or DB9 connectors and one DB37 connector to connect with cPCI-3534 interface card.
The cPCI-R3534 transition board can support rear I/O connection by using one DB37 connector.
The cPCI-3538 is an enhanced eight ports serial communication card used for cPCI platform. It includes a PGA (Programmable Gate Array), which supports the serial communication controller, and a 62-pin connector which connects external I/O port on the front panel or the rear I/O.
The expansion cable has eight standard DB25 connectors and one DB62 connector to connect to cPCI-3538 interface card. User may also use one DB62 to DB62 cable to connect between one cPCI-3538 and C588XB for providing 8 channel isolated RS-232/422/485 interface.
The cPCI-R3538 transition board can support rear I/O connection by using one DB62 connector.
PCI-7841/cPCI-7841
Dual-port Isolated CAN Interface Cards
The PCI-7841/cPCI-7841 is a Controller Area Network (CAN) interface card. It supports a dual-port CAN’s interface that can run independently or bridged at the same time.
The built-in CAN controller of this card is Philips SJA1000, which provides bus arbitration and error detection with auto correction and re-transmission function.
PCI-9114
32-CH 16-Bit Up to 250 kS/s Multi-Function DAQ Cards
ADLINK PCI-9114 series are 32-CH, 16-bit, high resolution multi-function DAQ Cards. The PCI-9114 device features flexible configurations on analog input.
The devices are divided into 2 kinds: normal gain version and high gain version. Both versions provide 4 programmable input ranges for bipolar and unipolar inputs. The A/D on the PCI-9114DG device features a sampling rate of 100 kS/s with resolution at 16 bits, while PCI-9114A-DG/HG device features a sampling rate of up to 250kS/s with resolution at 16 bits.
The device supports automatic analog input scanning, and offers a differential mode for 8-CH analog inputs and maximum noise elimination, as well as single-ended modes for 16- CH analog inputs. The PCI-9114 also features 1-CH 16-bit general purpose timer/counter, 16-CH TTL isolated digital inputs and 16-CH TTL isolated digital outputs.
ADLINK PCI-9114 delivers cost-effective and reliable data acquisition capabilities and is ideal for a broad variety of applications.
PCI-9113A
32-CH 12-Bit 100 kS/s Isolated Analog Input Card
ADLINK PCI-9113A is a 32-CH, 12-bit, 100 kS/s isolated analog input card.
The PCI-9113A provides analog inputs with 3 programmable input ranges for both bipolar and unipolar inputs. The 32-CH single-ended analog inputs can be converted to 16-CH differential analog inputs, which improve the noise rejection in harsh industrial environments.
The analog inputs are isolated from the PC’s system ground. This feature not only protects the PC from being damaged from surges on the signal lines, but also eliminates ground loops and common-mode problems commonly seen in industrial measurement applications.
The PCI-9113A provides custom circuit area for input signal conditioning. Either signal attenuation or filtering can be applied on per channel basis.
With all the features, ADLINK PCI-9113A delivers cost-effective and reliable data acquisition capabilities for ATE, sensor monitoring, data logging, power transmission, and a broad variety of industrial measurement applications.
PCI-9112
16-CH 12-Bit 110 kS/s Multi-Function DAQ Card
The PCI-9112 is a 12-bit, 110KHz, multifunction DAS data acquisition card. The PCI-9112 DAS card uses state-of-the-art technology, making it ideal for data logging and signal analysis applications in medicine, process control, etc.
PCI-9111 Series
16-CH 12/16-Bit 100 kS/s Low-Cost Multi-Function DAQ Cards
ADLINK’s PCI-9111 series are 16-CH, 100 kS/s low-cost multi-function DAQ cards that feature flexible analog input configurations.
An RC filter is implemented on each A/D input channel to allow attenuation or filtering of the input signals.
The PCI-9111 series provide analog inputs with 5 programmable input ranges for bipolar inputs. The PCI-9111 series also support automatic analog input scanning.
The PCI-9111DG provides 12-bit A/D resolution while the PCI-9111HR provides 16-bit A/D resolution. The PCI-9111 series also feature 1-CH 12-bit analog output, 16-CH TTL digital inputs and 16-CH TTL digital outputs.
ADLINK’s PCI-9111 series delivers cost-effective and reliable data acquisition capabilities, and is ideal for a broad variety of applications.
cPCI-9116
64-CH 16-Bit 250kS/s Multi-Function DAQ Card
64-CH 16-Bit 250kS/s Multi-Function DAQ Card.
Features:
3U/6U Eurocard form factor, CompactPCI compliant (PICMG 2.0 R2.1)
16-Bit A/D resolution, up to 250 kS/s sampling rate
Up to 250 kS/s sampling rate
64-CH single-ended or 32-CH differential inputs
Onboard 1 k-sample A/D FIFO
Bipolar or unipolar analog input ranges
Programmable gains of x1, x2, x4, x8
512-configuration channel-gain queue
Bus-mastering DMA for analog inputs
8-CH TTL digital inputs and 8-CH TTL digital outputs
1-CH 16-Bit general purpose timer/counter
DAQ-2000 Series
4-CH, 14/16-Bit, Up to 2 MS/s Simultaneous-Sampling Multi-Function DAQ Cards
Adlink DAQ-2010, DAQ-2005 and DAQ-2006 are simultaneous-sampling multifunction DAQ cards to meet a wide range of application requirements.
The devices can simultaneously sample 4 AI channels with differential input configuration in order to achieve maximum noise elimination. They also provide 2-CH 12-bit analog outputs with waveform generation capability, which can be performed together with analog input functions.
If more analog input or output channels are required, multiple cards can be synchronized through the SSI (system synchronization interface) bus. This makes the DAQ-2000 series ideal for the stimulus/response test.
The DAQ-2000 series also feature analog and digital triggering, 24-CH programmable digital I/O lines, and 2- CH 16-bit general-purpose timer/counters. The auto-calibration functions adjust the gain and offset to within specified accuracies such that you do not have to adjust trimpots to calibrate the cards.
PCIe-U300 Series
4/8/12-ch PCI Express x4 Gen2 USB3 Vision Top Performing Frame Grabbers
Adlink’s PCIe-U300 Series is a PCI Express x4 Gen2 USB3 Vision frame grabber supporting 4/8/12 USB 3.1 Gen 1 ports for multiple USB3 Vision device connections with data transfer up to 5 Gb/s per port.
The PCIe-U300 Series supports 5V and up to max. 1500mA current per port for external USB3 Vision industrial cameras. To guarantee industrial-grade high-bandwidth performance for each port, four independent Fresco FL1100 USB 3.1 Gen 1 host controllers with PCI Express x4 Gen2 interface allow each USB port to provide up to 5Gbps bandwidth when operating four ports simultaneously. It also supports software-programmable per-port power on/off control for fault recovery operations.
ADLINK’s PCIe-U300 Series provides excellent capability to interface with USB 3.0 devices for machine vision, factory automation, quality assurance, logistics, medicine, and security and traffic surveillance applications.
