MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
Xtreme/104-Plus Opto
PC/104-Plus Serial Expansion Card
Connect Tech’s robust Xtreme/104-Plus product family has introduced optical isolation as an additional feature to its product offering. Xtreme/104-Plus Opto provides the added protection of 3kV optical isolation on a rugged and compact form factor for your critical applications.
PCI 2.3 and PC/104 2.0 compliant, this PC/104-Plus card includes a PC/104 pass-through connector for compatibility with legacy PC/104 cards.
Dependability, high speed data transfer rates and 3kV of optical isolation protection make these cards ideal in environments where harsh conditions may disrupt communications.
Use Xtreme/104-Plus Opto for embedded systems in the military, aerospace, medical and industrial sectors.
PCI to CompactPCI Adapter
Passive extender card
This passive extender card allows developers to install a CompactPCI card into a standard Universal 3.3V or 5V PCI system, avoiding the need for a dedicated CompactPCI system for development work.
The design also includes a reset button, for convenient push-button resetting of the test card without resetting the host computer. This feature is extremely useful when debugging hardware interactions requiring a hardware «clean slate». (This is a hardware reset only. It does not restore the PCI configuration space.)
NOTE: Ensure the cPCI card under test supports the bus voltage used by the adapter’s PCI host system. Consult your system documentation to determine the voltage on your PCI connector.
Standard Usage
Insert the adapter into the desired slot in your host system. Connect the test cPCI card into the connector.
ISA to PC/104 Adapter
Passive extender card
This passive extender card allows developers to install an 8 or 16-bit PC/104 card into a standard ISA bus PC system, avoiding the need for a dedicated PC/104 stack for development work.
The adapter is equipped with a stack-through connector so the test card can be installed on either side enabling probing on the front or the back.
The design also includes a reset button, for convenient push-button resetting of the test card without resetting the host computer. This feature is extremely useful when debugging hardware interactions requiring a hardware «clean slate».
Standard Usage
Simply stack the test PC/104 card onto the adapter’s PC/104 connectors and insert the adapter into the host system’s ISA slot. No additional configuration is required.
Important Note:
Only one PC/104 card can be used per adapter card.
PC/104-Plus to Mini PCI Adapter
PC/104-Plus - Mini PCI Adapter
This adapter allows users to install a Mini PCI card, such as an IEEE 802.11 wireless LAN card, into a standard 3.3 or 5V PC/104-Plus stack.
Equipped with a passive PC/104 stack-through connector, the card can be installed in a PC/104-Plus stack without interfering with the signals of PC/104 cards located above or below.
The adapter includes a 3.3V regulator for use in 5V-only systems.
Standard Usage and ID Selection
Simply insert the Mini PCI card into socket on the card and insert into the host system’s PC/104-Plus stack. Each card within the stack must have a unique ID ranging from zero to three. You will be required to set a pair of jumpers to specify where your card is located within the stack. (Ensure that no two boards share an ID number.)
The jumpers remain unpopulated for an ID of zero. Populate the left jumper for an ID of one, right jumper for an ID of two, and populate both for an ID of three.
No additional configuration is required.
Xtreme/PSU-XP
PC/104 form factor power supply
Connect Tech’s Xtreme/PSU-XP is a high efficiency, high powered PC/104 form factor power supply with extended temperature capabilities. Xtreme/PSU-XP provides power to terminal block connectors and powers all of the PC/104 family expansion buses such as PC/104, PC/104-Plus, PCI-104, PCI/104-Express and PCIe/104.
Xtreme/PSU-XP is a highly reliable power supply which provides 154W of total output power with +3.3V, +5V, +12V, −12V and +5V-Standby output voltages. It can be used as a stand-alone power supply to power any other embedded system, or used directly to power any PC/104 stack or single board computer (SBC).
The Xtreme/PSU-XP has a wide input voltage range that accepts +6V to +36V DC and is specifically designed for use in a broad range of rugged applications including military, industrial, and air and ground vehicles.
Xtreme/PSU-XP can be used in combination with Connect Tech’s stackable CPU and expansion boards for a total design solution.
FreeForm Daughter Board
Adapter for FreeForm/104 FPGA development board
The Daughter Board is an adapter for Connect Tech’s FreeForm/104 FPGA development board that enables users to capture and process synchronous and asynchronous RS‑232 or RS-485/RS-422 serial data with customizable FPGA implementations.
When used with a FreeForm/104 FPGA development board, the Daughter Board allows for easy and rapid design changes at run time, which makes it ideal for high speed, compute intensive, reconfigurable applications.
FreeForm/104
PC/104 based FPGA development board
FreeForm/104 is a PC/104 based FPGA development board for digital I/O and control applications.
Based on Xilinx’s Spartan-3E, Connect Tech’s FreeForm/104 provides off-the-shelf flexibility, making it ideal for high speed, compute-intensive, reconfigurable applications. The FPGA configuration is stored in flash memory, allowing users to easily implement design changes during development or in the field.
Customized FPGA configurations can be developed easily by the user with the free Xilinx ISE WebPACK software, or through Connect Tech’s engineering services.
The versatility and high speed processing core of the FreeForm/104 makes it ideal for applications including; DSP, software defined radio, aerospace, defense systems, computer hardware emulation, production or laboratory testing and industrial process monitoring and control.
Xtreme/PCI-104 Opto
PCI-104 board for serial communications
Connect Tech’s robust Xtreme product family now includes high density optical isolation as an additional feature to its product offering. Xtreme/PCI-104 Opto provides the highest port density, with 12 ports on a PCI‑104 card, along with the added protection of 1kV optical isolation on a rugged and compact form factor.
Dependability, high speed data transfer rates and 1kV of optical isolation protection makes these cards ideal for critical applications whereby harsh conditions may disrupt communications.
Use Xtreme/PCI-104 Opto for embedded systems in the military, aerospace, medical and industrial sectors.
ComSync/PCI-104
PCI-104 platform option for serial communications
Connect Tech’s ComSync product family has expanded to include a PCI-104 platform option for your synchronous and asynchronous serial communications.
Based on the PCI bus and a compact form factor, this two-channel, multi-protocol serial adapter offers high performance, reliable, synchronous or asynchronous serial communications for your industrial or embedded needs.
Providing the maximum in flexibility, this PCI-104 card allows you to choose from multiple electrical interfaces, protocols and encoding schemes to ensure your hardware solution is ideally suited to your specific application.
ComSync/PCI-104 is PCI-104 1.0 compliant and includes a PCI-104 stack-through connector to interface with a PCI-104 card stack.
Xtreme I/O Opto
PCI-104 Digital I/O board
Connect Tech’s Xtreme I/O Opto is a 48-bit isolated PCI‑104 Digital I/O board grouped with 24 optically isolated inputs and 24 optically isolated outputs. The flexibility of the FPGA technology allows integration and customization to meet application requirements.
Fully PCI-104 compliant, Xtreme I/O Opto Digital I/O can be controlled directly from a memory mapped register set in any operating system.
The reliability of the Xtreme I/O Opto, along with the added protection provided by 3kV isolation on the Digital I/O ensures optimal performance and protection under extreme environmental conditions. Xtreme I/O Opto is ideal for PC/104 and other embedded technology applications in the military, aerospace, medical and industrial sectors.
