MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
Xtreme/Multi-I/O
Сommunication board
Connect Tech’s Xtreme/Multi-I/O features dual SJA1000 CANbus controllers, isolated serial and CAN ports, and two MultiTech Universal compatible sockets on a single PC/104 board design. This high density communication board offers an all-in-one communication solution, optimizing Size, Weight, and Performance requirements. This innovative product takes full advantage of the latest technologies in jumperless configuration, high voltage isolation and advanced communication functionality.
On-board FPGA and PIC32 microcontroller facilitate jumperless configuration of the board, with the FPGA providing a full-featured J1708 controller. Xtreme/Multi-I/O includes two galvanic isolated CANbus controllers with 2500V isolation protection and advanced networking and configuration capabilities.
The 4x RS-232 ports and 1x RS-485/J1708 port features 2500V isolation protection and individual +5VDC isolated power supplies, providing less noise and increased system protection. With USB connectivity and jumperless setup, extended operating temperature, and versatile options, Connect Tech’s Xtreme/Multi-I/O is ideal for CANbus, serial, wired and wireless communication.
ComSync/PCI-104 Gen. 3
Multi-protocol serial adapter
Based on the PCI bus and a compact form factor, this two‑channel, multi-protocol serial adapter offers high performance, reliable, synchronous or asynchronous serial communications for your industrial or embedded needs.
Providing the maximum in flexibility, this PCI-104 card allows you to choose from multiple electrical interfaces, protocols and encoding schemes to ensure your hardware solution is ideally suited to your specific application.
Xtreme I/O ADC-DAC
PCI-104 Analog and Digital Data Acquisition Board
Connect Tech’s Xtreme I/O ADC-DAC is an analog and digital peripheral board for the PCI-104 small form factor embedded marketplace. This product is ideal for data acquisition, measurement and control applications.
Xtreme I/O Express ADC‑DAC
PCIe/104 Analog and Digital Peripheral Board
Connect Tech’s Xtreme I/O Express ADC-DAC is an analog and digital peripheral board for the PCIe/104 small form factor embedded market place. This product is ideal for data acquisition, measurement and control applications.
The Xtreme I/O Express ADC-DAC supports harsh environments with demanding conditions with an extended temperature range of −40°C to +85°C.
Xtreme/104-Express
PCI/104-Express form factor RS-232/422/485 add-in card
Xtreme/104-Express is Connect Tech’s first PCI/104‑Express multi-port serial board. Fully PCI/104‑Express compliant, this board provides a PCI-104 pass-through connector for easy transition from legacy PCI-104 cards to PCI Express stacks.
Connect Tech’s highest throughput to date, Xtreme/104-Express incorporates a fractional baud rate generator that allows almost any baud rate to be matched accurately. Fail-safe transceivers ensure glitch-free network operations, while industrial temperature grade components make certain your communications are protected from disruptions that can occur in harsh environments.
This PCI/104-Express serial board offers reliability, high data rates and longevity for aerospace, medical, instrumentation and industrial control applications.
SSD-104 SATA 2.5”
SATA 2.5” Drive Carrier
Connect Tech’s SSD/104 SATA 2.5″ Drive Carrier is a complete rugged stackable storage solution that allows any 2.5″ SATA hard drive to be installed into any Type II PCIe/104 stack or embedded system.
The SSD/104 SATA 2.5″ Drive Carrier expands storage capacity and reduces overall storage footprint in an embedded system.
Designed to be used with any 2.5″ SATA drive, the SSD/104 SATA 2.5″ Drive Carrier can be used with the latest SATA III SSD’s for high performance applications or other high capacity drives.
Xtreme/PSU-UC
High Powered PC/104 Form Factor Power Supply
Connect Tech’s Xtreme/PSU-UC is a high efficiency, high powered PC/104 form factor power supply featuring a wide input voltage range that accepts +8 to+36V DC, and provides 115W total output power with +5V, +12V and +5V Standby output voltages.
Xtreme/PSU-UC features on-board Ultracapacitors to provide uninterrupted UPS backup capability. Because it uses Ultracapacitors in the place of batteries the Xtreme/PSU-UC can provide instant shortterm power backup in the event of a power loss or interruption, and be fully charged and ready to provide backup power again within seconds. The Xtreme/PSU-UPS uses rugged components and can operate in the industrial temperature range of −40°C to +85°C / −40°F to +185°F.
Xtreme/PSU-UC can be used in combination with Connect Tech’s stackable CPU and expansion boards for a total design solution, and is ideal for use in a broad range of rugged military and industrial applications.
SMART Battery Adapter
Battery Adapter
Connect Tech’s Smart Battery Adapter allows for easy integration of a SMART battery into an existing PC/104 system. Used in combination with the Xtreme/PSU‑UPS power supply, it provides a complete Power Supply solution with uninterrupted power supply and battery backup functionality.
Xtreme/PSU-UPS
High Powered PC/104 Form Factor Power Supply
Connect Tech’s Xtreme/PSU-UPS is a high efficiency, high powered PC/104 form factor power supply featuring a wide input voltage range that accepts +6V to +36V DC, and provides 154W of total output power with +5V, +12V, −12V, +3.3V and +5 standby output voltages
Xtreme/PSU-UPS features SMART battery charging for uninterrupted power supply and battery backup functionality, along with extended temperature capabilities. Use this with Connect Tech’s Smart Battery Adapter ADG061.
Xtreme/PSU-UPS can be used in combination with Connect Tech’s stackable CPU and expansion boards for a total design solution, and is ideal for use in a broad range of rugged military and industrial applications.
Xtreme/PSU
High Powered PC/104 Form Factor Power Supply
Connect Tech’s Xtreme/PSU is a high efficiency, high powered PC/104 form factor power supply solution with extended temperature capabilities. Xtreme/PSU provides power to terminal block connectors and powers all of the PC/104 family expansion buses such as PC/104, PC/104-Plus, PCI-104, PCI/104-Express and PCIe/104.
Xtreme/PSU is a highly reliable power supply which provides 115W of total output power with +5V, +12V and +5V-Standby output voltages. It can be used as a stand-alone power supply to power any other embedded system, or used directly to power any PC/104 stack or single board computer (SBC).
The Xtreme/PSU has a wide input voltage range that accepts +6V to +36V DC and is specifically designed for use in a broad range of rugged applications including industrial, and air and ground vehicles.
Xtreme/PSU can be used in combination with Connect Tech’s stackable CPU and expansion boards for a total design solution.
